© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Sitting at idle all is good , after driving for 5 mins , half engine bank is gone . After restart all is good again . Okay I will check all...
Hi , I am in the process of getting my car back on the road after years of restorations . All parts are new including Fuel distributor ( restored...
Thank you very much for sharing the information . [emoji120]
I am restoring my 1975 308 GT4 . Before i remove anything , can I check if all the rubber seals for all windows , glass from front , side to rear...
thanks so just to double confirm the new hose tie with the old hose at the engine bay side should be pulled IN from the central console , NOT the...
Thank you , My mechanic has tried the method but the old hose was so tight that cannot be pulled out from the engine area . Picture attached So...
I am replacing my evaporator , the two coolant hose from the central tunnel are harden and is leaking . How can I replace the coolant hose at the...
Thanks Steve , I believe you refer to the coolant flow direction ? As per the picture below and I hope the picture below is correct ( follow the...
Thanks for the information . That’s right it’s a integrated HVAC system . The system uses both the coolant and refrigerant to regulate the A/C...
Hi I am restoring my Ac unit , and I saw there is a AC cooling condenser and a heater coil . I would like to find out how does this function...
Thank you for sharing !
Hi , May i check if you know can I fit the 308 GTS rear Koni shock absorber on my GT4 for temporary usage ? I am confused because some website...
1979 308 Gts carburetor version
Yes I have the rubber seal but I am wondering if there is any steel moulding with rivet at this area highlighted in green ? Or this is all correct...
Hi , I am restoring my 308 GTS , May I know is there a roof rail moulding at this roof area highlighted in green ? Thanks [ATTACH]
Hi May I know what’s other options /brand for Testarossa 1990 air and oil filter ? Thanks
[emoji123] [emoji23] yes and hopefully this pandemic situation is getting to an end and will be forever gone . I have been working on my Diablo...
Hello Joe , Hope all is well . Thank you for information , this is very helpful .
Hi all I am working on restoring my 91 Testarossa engine , I went through 3 manuals - Technical manual , Workshop Manual and Owner manual in the...
I have changed the inner bearing it’s now new . When engine is cold there is no noise . Only when engine gets warmer then the noise will slowly...
