© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks
That’s exactly what has happened, the seal swells up and becomes a real bear to pull out, If you are lucky then needle nose pliers will get it out...
Yes, Importing a car Down Under is a real punish
I’ve stated this example in the past coming from my own personal experience, When I was in the market for a 328, there were only 4 for sale at the...
Where are the breathers and can they be checked easily enough?
Same thing happened to me on my 87’ 328. My sensor was faulty and when I removed it, a whole lot of oil came out. Most probably caused by a faulty...
Correct, 4 allen head bolts and it comes apart
I will be interested din the results. I have been thinking of doing this for a while now and actually hiding the camera in the lower rear valance...
Yes they pop out quite easily from the top. As others have said, don’t pull at the flaps as they can easily break. Pull up on the inner rim
Hey Don Giovanni that’s not fair,, the previous owner isn’t even here to defend himself :D:D:D
After how many years would you need to replace Hill Engineering bearings?
I found that out the hard way when I had mine rodded and re soldered
You may want to define awful though,, is it a rich petrol fume smell or is a burnt oil smoke smell?
My exact situation,, I rebuild the GT4 engine and overhauled the suspension, whilst it drove really nice,, I could never get the carbs right,,It...
My Uk spec 87’ locks both doors irrespective of which door lock is used.
No 328’s,, Boring event :D
Thanks Mike
Can’t believe you were able to sell an import at full asking price! The fridge man would never believe you!
Does the 328 require any cutting of the firewall like others have had to do?
I used the same kit 2 years back without a problem,,They like the original require the tack weld
