© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I called kragens and they offer tool rentals for free (you must pay for the tool and they reimburse you when you return it). The tool worked...
I bought all the parts through Ferrari dealers and had my original clutch rebuilt to factory specs and bench tested for correct operation and...
I have a 1977 308GTB. I just installed a new clutch, throw out bearing, resurfaced the flywheel, new rear seal and pilot bearing (new rubber "O"...
Is there a special tool or techneque to remove the pilot bearing (thats located in the rear of the crank shaft in the clutch area)? Thanks
Driving the Isetta is a lot like driving a Ferrari. It takes nerves of steel to drive ether, especially the Isetta (I mean, really, to go out into...
UPDATE ON MARCH 3, 2010 First I want to thank every one, you all have been very helpful in me finding my oil leak. Through a lot of...
Got it all out. Thanks again for all the help...Greg [ATTACH] [ATTACH]
I am ready to remove the real main seal. Its really stuck in there, is there any special way to remove this. Do you just pry it out with a flat...
WOW, thanks for the response. Your pics really clear things up. I have an oil leak from the rear seal and wanted to make sure that it wasnt blown...
Here are the pics of the hose I'm talking about. It appears that the head is vented into the bell housing. Wouldn't this vent oil into the...
Hey guys, what is the purpose of the vent hose that is attached to the drivers side end of the rear head and goes to the top rear bell housing....
Yes I did and it is not leaking. Thanks for replying
That was the first thing we did. Thats what makes it so hard to find. I cleaned everything up and ran (reved the motor up to 2000rpm and down for...
When I pulled the bell housing to replace the three "O" rings, the inside of the bell housing was oily. At that time I figured that it was gear...
I rechecked the cam cover gasket, its dry and I checked the oil cooler lines also dry. thanks for your reply.
Both are dry and not leaking. Thanks for your reply
I bought my 1977 308 GTB about ten years ago. Back then the car had all of the obvious oil leaks (cam shafts and such). Once the 60K maintenance...
