© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Guys, anyone seen this sort of piston crown damage before ? I have had a persistent problem for 1k miles with what I reluctantly conceded...
Agree.....Old rubber is dangerous as. First sign of rain an you will be as out of control as a frog in a sock.
So....does this mean that only a genuine Campagnolo 14" rim has "Campagnolo" embossed on the onside of the rim ? I must say that Ferrari being...
Encouraging..... I have 16" on my QV and the lettering is all embossed but the spare was a 14" chromadora with the decals which I always...
Hey Guys, How do you tell conclusively that a wheel is a genuine OEM. one has appeared on Ebay and the writing on the rim is not embossed but...
Is there one of these on the eurospec ?
Yep, used this and the tapping was loudest with the probe on the end of the cam cover, closest to the exhaust cam pulley wheel. This is not to say...
Hi, Is a cracked header pipe obvious (exhaust manifold to us Brits ?)...would I expect to see any visual evidence or would it be conclusively the...
Hey Chris, You say the belts warm up....do you mean when it reaches Operating temp or just when the belt gets a bit warm ?
Hi Guys, Getting some good stuff here....thanks to you all. This week I am going to scrutinise the exhaust / inlet manifolds and I would...
Hi, yep..... Checked out the exhaust joint at the head with a bore scope so I can get in really close and there was no sooty evidence of a leak....
Hi, interesting thoughts.... The oil was changed 500mls ago and was filled with 10W60 fully synthetic...my understanding is that the 60...
Hi Guys, Looking to "tap" the vast knowledge base of the forum to save me some expensive garage bills. I have been struggling to resolve a...
Hi, The cam covers are really hard to keep clean. I did some low pressure blasting on mine when they were off to do the valve clearances. A...
Hi Antonino, I would be very cautious about attempting this operation......the plastic body of the speedo is over 30 years old and very brittle as...
Hi, The factory grease used in the originall assembly of the speedo / odo degrades over a long period of time and goes hard, preventing the...
Getting bored waiting for my valve shims to arrive so I bought myself a cheap & cheerful gravity fed sandblaster for $35 and cleaned the cam...
Installed a Birdman fusebox as the fist job after purchase because the indicators flashed slowly & were dim. The new fusebox made no diference...
At the risk of provoking loads of horn innuendo..... I decided to re-furb the front grille as the previous owner had painted it very badly in...
Just a thought....why not buy Superformance rims and have them re-finished. The total cost is probably still competitive. I saw a pic of a...
