© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Maybe a long shot but when I bought new caps from Superformance I found that some of the wells for the leads were not drilled deep enough so that...
They all have their nuances and there aren't a whole lot of them available to choose from (relatively speaking) So the more you narrow down your...
Maybe a little more info. Is it just the intake cam that shifted? Is the vernier retainer bolt installed?
When I first got my 308 I drove it up to Glacier Point in Yosemite National Park, 179 miles from home. After taking in the awesome views I got...
We're neither. Dinosaurs went extinct but there will always be enough interested people to keep every classic Ferrari built in someone's hands. At...
All I know is that in my '83 QV there is a point in 5th gear when both needles are straight up 5k rpm and 90 mph because I see it all the time :)
I'd hate to die in a crash just because a fire extinguisher cracked the back of my skull open.
Okay sorry, change the "you" to an "I" because I couldn't do it, as far as I know because I wouldn't even try, but I did do the front lid by...
You definitely cannot just manhandle the thing on and off alone but with the ingenuity of your human mind you can certainly conjure up some sort...
The ground connection is on the forward frame support on the driver's side just below the headlight. I put a battery disconnect switch there, you...
One caveat if you do this, unlike DRL's you can forget to turn them off when you shut down so you have to develop a mental habit to make certain...
If there is going to be leakage of the electrical sort it's not going to be to the ceramic insulation around the plug so my vote is - NO
I always figured that if my left knee ever went out I'd swap for an Alfa 4C but in regards to a classic replacement I'd go for a '63 XKE. [ATTACH]
I did the headlight mod to my car so the buckets will stay down when in parking lights mode then I installed Euro lenses that have clear sections...
Very frustrating. You cannot troubleshoot or fix an intermittent problem when it is not present other than just guess or shotgun it. I Had an...
My heads came right off with no issues. I think it's a bit premature to concentrate on a puller before getting to a point where you have...
Maybe it's not "twice" as big but it's about an inch and a half or two inches thicker and there are notches in the lower header so it will fit in...
The only "special" tools I've needed to buy so far were the ring nut socket, valve spring compressor and blind bearing puller.
You think so? I've got one, got it from Nick's Forza. You know they have to be about twice as big to equal the efficiency of the stock radiator...
I think johnk's picture sums it up. If the fans keep it stable at that point, sitting still on a hot day, it's working and that's with stock...
