© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I believe Ohms
Test #1. Buzzing stopped at 57 seconds. Test #2. The resistance never stayed consistent. Bounced between 2-5 (most consistently around 2.5-3)
I am heading off on a family trip for 5 days, but when I get back I’ll do these tests and will report back!
Just turned the car to “on” and could hear buzzing from frunk driver side, and it did seem like when I pulled the orange relay it did click each...
Here are some pics hopefully with numbers more clear: [ATTACH] [ATTACH] [ATTACH]
Wow, I apologize… Haven’t checked back on this thread. I went out and snapped a pic of my relays and pins. Also, I DO NOT have an ABS on/off switch.
Thank you! I’ll probably swap the sockets for 30 and 86 to see if that solves it with the new relay. But before trying that, I’ll also confirm the...
I was thinking the same. Replace the green special relay (or switch the wiring pin locations to make the one work I already have), and replace the...
The “special” green relay looks to be factory. Pulled out the harness to confirm wiring and it is wrapped in an old Ferrari sticker. So even...
I just verified the numbers on the relay match where the diagram is showing for the wires. So it seems to be correct, even though the relay itself...
The green is Siemens, the orange is Hella, and the other black one is whatever this says (ATE?)… pic attached. [ATTACH]
Got it! The green relay I removed doesn’t match the pins shown on what was posted above and the relay I purchased…? Just want to be sure I’m not...
This is what I purchased. Am I replacing the relay with the white dot? [ATTACH]
so none of the relays match what you posted… BUT, I found a relay at my local store that matches what you posted above. Is a wrong relay in my...
Thank you!!! I'll give some searching around town locally to see if I can find this 5-pin relay! Man, I sure hope it's this simple...
Update… ended up picking my car up from the dealer since they couldn’t solve the issue. Replaced the ABS ECU per their recommendation which did...
I would also recommend Botta Moto Works in Portland. They did the engine out and some other work on my 355.
ABS has always been on since I bought the car. BUT, only somewhat recently the brake light now also stays on. I wasn’t overly concerned about the...
Found one on eBay for a decent price. We will see if it actually solves the problem.
Dealer said ABS module (part #148838) failed every part of the testing with their diagnostic tools. They are confident that is the issue.
