© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Good job! But Ferrari really didn't allow you, you allowed yourself. :)
Would be much less headache and less trouble if you invest in a "airlift" bleeder system. Basically it allows you to refill the coolant system...
I've had the same exact experiences in my Ferrari, I sometime wonder if this thing is a disaster magnet? What puzzles me is how can anyone miss...
Like the others said the extenders is to go on the 2nd set of the o2 sensor. How long did you ran the car like this? Running lean can definitely...
Get yourself a Snapon
I think this is what Josh is talking about. I am still really puzzled at how can Ferrari let cars leave the factory with a bracket rubbing on a...
Does the Fabspeed headers have the secondary air injection tubes now? I recall on their earlier headers they didn't have the 2ndary injection...
well, at least it doesn't have sticky interior pieces... :)
I am seeing about the same thing on my 360, I posted a question regarding this before and the answer were that the speedo will always show high as...
I would think that would be least of your issue especially with the gated shifter on the Ferrari.
Big_luke, That's an interesting idea. Say you do the modification, first thing that comes in my mind would be the thrust bearing position...
When I take an engine apart (non-Ferrari) or do any kind of major service I always disable the ignition and let it crank until the oil pressure...
I may have posted the pic, but the pictures belong to Lou not mine.
That's a pretty good pictures of the pre-cats that have been broken up. They rattle inside the chamber over time and loose their 90 degree edges...
I wouldn't leave it on the whole time, but only have it flash when I am stepping on the brake. In conjunction with the motorcycle flasher kit it...
David, So far I don't have a CEL with using the 02 sensor extender with my stock CATs, all the people who reported with problems are either...
Here is a link for a picture of the access hole. The oval plug on the side of the fuel tank access is where you can get to the engine bay frame...
This is the method I used to loosen and remove the top nuts. I used a 1/4 drive 13mm Snapon short socket, and a 1/4 breaker bar. My 1/4...
David, That's something I have been meaning to do just haven't had time. The light used is call a rain light. Made in England with LED lights...
The pre-cat is a round cylinder, if you use a cut off wheel to make a 200 degree circular cut along the factory weld area where the pre-cat is...
