© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Eric, See my previous post, Item 5. I got a Stark Elite 250 in-lb, 1/4" drive torque wrench, sold through Amazon. It is small enough to fit...
Eric, I think if you just try to left-hand drill the stub it will just back out as you are trying to drill it. Steel studs into aluminum are...
All, 1. Right after I got Izzy, I installed the Capristo mounts. I noticed that after the car had been driven a while, and when I let off the...
All, I am nearing completion of installing a new exhaust in Izzy consisting of Fabspeed headers with insulating blankets and Novitec everything...
PS Ahmed, Make sure the car has a spare key. Mine didn't and it cost me $807 for the key and $177 for the programming. This didn't include...
Thanks, TT. Glad I could help. Tom
Ahmed, I bought Izzy from Ferrari of Washington (Jonathan Branco) about a year-and-a-half ago. I could have gone the CPO route at extra cost....
WeatherTech has a nice sunshade that fits on the inside. Excellent fit. Rolls up for storage. $100. WT also has a very nice pair of floor...
The first picture, below, is of a tow eye from my brand new 2016 Mercedes GLA250; note the Mercedes star and the number near it. The emergency...
I also had a strap holding the compressor to the front firewall break. I decided to replace the leather straps with nylon webbing and buckles (If...
Julia, I have a sunshield from Weathertech. It rolls up nicely and stores in the boot. I also have a pair of floor liners (as distinguished...
Timo: PS: cost for Joe's work was $480 and IIRC, delivery was 2-3 months. Tom
Timo, Try joesclassiccarradio.com . He did a great job on my Becker Europa II in my 330. He replaced the vintage circuitry with modern and...
I hear what you all are saying and, intellectually, I don't doubt you are correct, but I am still dazzled by Ricambi's apparently incorrect...
Brian and Taz, Thanks for the comments. Of course, until I actually see my crank in the flesh there will always be a tiny bit of doubt....
Thanks, Russ and Chris, Maybe the drafting department at Ferrari was just too lazy to redraw the crank with a flat arrangement after they drew...
If the 430 has a flat crank, how come the exploded view of the crank assembly, presumably provided by Ferrari SpA, in Table 2 of the 430 section...
Jim, Yes, after shifting into neutral in a three-pedal car, I always let out the clutch. Theres no point in putting it in neutral while...
I would almost always get a jerk when shifting 1-2, 2-3 and maybe 3-4. 4-5, 5-6 and any downshift was OK. It was as if I lifted my right foot...
Two or three of my taillights had rub spots where the red plastic housing was forced against the fender metal. I didn't think this was right, so...
