Search Results | FerrariChat
Buy

Search Results

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Search Again
Page 3 of 4
  1. Foxie
    Post

    Degreeing cams

    That's a good one alright, never knew about it before !
    Post by: Foxie, Mar 28, 2021 in forum: Technical Q&A
  2. Foxie
    Post

    Degreeing cams

    Getting ready to set the cam timing. I had cut out the centre of a degree wheel to stick it on the front face of the crankshaft damper when I had...
    Post by: Foxie, Mar 27, 2021 in forum: Technical Q&A
  3. Foxie
    Post

    Main and rod bearing question

    I'm in the process of rebuilding my 308 after head and piston damage. As the engine was completely stripped down, I have replaced as a matter of...
    Post by: Foxie, Mar 23, 2021 in forum: Technical Q&A
  4. Foxie
    Post

    Shorten exhaust cam.

    Here are the directions from Catcams: http://www.catcams.co.uk/acatalog/Cam_Timing.html
    Post by: Foxie, Mar 23, 2021 in forum: 308/328
  5. Foxie
    Post

    Shorten exhaust cam.

    I'm fitting a set of 402 cams at the moment. They do not have index marks. I contacted Raf at Catcams, he said set them up at the TDC lifts on...
    Post by: Foxie, Mar 22, 2021 in forum: 308/328
  6. Foxie
    Post

    Legit Street Cars Checks Out a 308 With a Snapped Timing Belt

    Did he pull the motor with the front exhaust manifold still attached and the a/c compressor bolted in ?
    Post by: Foxie, Mar 20, 2021 in forum: 308/328
  7. Foxie
    Post

    Legit Street Cars Checks Out a 308 With a Snapped Timing Belt

    Snapped timing belt - one bent valve - he was lucky !
    Post by: Foxie, Mar 20, 2021 in forum: 308/328
  8. Foxie
    Post

    Degreeing cams

    After some more searching , I found this, co-incidently, fromCatcams, the company which manufactured my new cams. They don't mark the cams,...
    Post by: Foxie, Mar 16, 2021 in forum: Technical Q&A
  9. Foxie
    Post

    Degreeing cams

    [ATTACH] The translation is starting to make sense now !
    Post by: Foxie, Mar 15, 2021 in forum: Technical Q&A
  10. Foxie
    Post

    Degreeing cams

    That's good thinking ! Am I correct in thinking ALL 4 cam marks should be lined up when No. 1 cylinder is on TDC compression, not just the rear...
    Post by: Foxie, Mar 15, 2021 in forum: Technical Q&A
  11. Foxie
    Post

    Degreeing cams

    Well all the cylinder head repairs are complete on my '78 GTS, and the block/gearbox are all assembled, with a new bearings and a set of hi-comp...
    Post by: Foxie, Mar 15, 2021 in forum: Technical Q&A
  12. Foxie
    Post

    Degreeing cams

    Yes, I got mine from Superperformance. Very well made and drilled all round for dowels, just like the cams (Catcams ) they also supplied, and...
    Post by: Foxie, Mar 13, 2021 in forum: Technical Q&A
  13. Foxie
    Post

    Degreeing cams

    Got ya covered ! [ATTACH]
    Post by: Foxie, Mar 11, 2021 in forum: Technical Q&A
  14. Foxie
    Post

    Degreeing cams

    It will be sitting on the bench with the cam covers off !
    Post by: Foxie, Mar 11, 2021 in forum: Technical Q&A
  15. Foxie
    Post

    Degreeing cams

    Thanks for that, got it posted now !
    Post by: Foxie, Mar 11, 2021 in forum: Technical Q&A
  16. Foxie
    Post

    Degreeing cams

    Tale of a timing belt swap gone wrong I bought my 1978 Ferrari 308 GTS in 2011 with 36,000 miles on the clock. In 2018 with 50,000 miles up, I...
    Post by: Foxie, Mar 11, 2021 in forum: Technical Q&A
  17. Foxie
    Post

    Degreeing cams

    Well I've been able to upload it as a downloadable link. How can I get it to open as a standard post ?
    Post by: Foxie, Mar 10, 2021 in forum: Technical Q&A
  18. Foxie
    Post

    Degreeing cams

    https://www.ferrarichat.com/forum/attachments/210310ferrari-chat-report-pdf.3104033/?temp_hash=29ac85f8904904ae3ed3471f106f2298
    Post by: Foxie, Mar 10, 2021 in forum: Technical Q&A
  19. Foxie
    Post

    Degreeing cams

    Thanks for that. I've been able to convert it to acrobat, but I still can't upload it.:(
    Post by: Foxie, Mar 10, 2021 in forum: Technical Q&A
  20. Foxie
    Post

    Degreeing cams

    I have done a write up with pics on my recent experience changing the belts on my 78 308 in a WORD document. I tried to paste it in the reply...
    Post by: Foxie, Mar 10, 2021 in forum: Technical Q&A
Showing results 41 to 60 of 65 Next >
Search Again
Page 3 of 4