© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Mine runs low too, like the first tick I guess that would be close to 20 or less, I think it's prolly normal. When mine idles just a tad too low...
Thanks for the quick help, I feel much better about the fuses .. I just ordered a fog machine for 35 bucks, I feel you could be right I have a...
Yes, o2 sensors. And I've checked positions many times. I even unplugged one and saw the correct one go dead in my obdii software. I put 2 new...
Sorry, my car agrees with the plate, yet the manual lists RH O2 Probe for 31 (which is missing on mine, and also missing on my plate). And, I have...
Please help, i'm confused. I've included the floor panel on passenger side fuse box description from the manual, and taken a picture of the...
After 100 miles I can't tell a whole lot of difference, smoother if anything especially the gearbox after the fluid change (red line 75w90ns). I...
oops, meant to attach these .. [ATTACH] [ATTACH]
Well, another noob engine out experience comes to an end. 2 months total and less than 3300 USD in parts and new tools later including engine...
Good question, I think from one of the big expensive lines running from the oil res to the engine.
0-40 made mine leak, I went back to 15w-50.
Got it back together and made a few 'proving' runs today sans rear bumper and rear wheel guards, license in the rear window, gear oil change in...
And let me further state, the f355 is far more easy to work on than I would have ever thought, hats off to the engineers!
Let me restate my last thoughts more .. if I can work on it, I can keep it. If I have to let someone else charge me more than I want to/ can...
I personally don't care about what it does to the value of the car .. who cares on a 85k mile f355? Let me ask another question off subject, who...
Thanks!! Yes the 6 nuts, i will leave those where they are because they are firm as is. Yayeh!
The WSM if I read correctly says 25nm or 18ft/lbs for the nuts that hold the water pump front half to the main body. It seems too much to me, I...
Figured it out, first position the belt with the tensioner bearing off, then position the tb and then tighten, then lock down the tb. I'm doing...
I can't figure out how to compress the hydraulic tensioners .. the manual says to rotate [something?] toward the inner side of the engine until...
Oh I forgot to mention, item 37 is where my coolant leak was, oh well i'm having fun .. In retrospect, I could have done a test I thought about in...
