© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
IMO the big rubber diagram inside has a hole in it. Most of the time the hole is from the master cylinder leaking brake fluild on it. A easy fix...
Have the evaporator assembly install. Ready to take it to work tomorrow and evacuate and charge it up with r12. Yes much more air flow.
I have my new blower motor installed in the case. Before I put in the evaporator in I wanted to check out for any problems. No problem or noises,...
Didn't have a oil pressure short problem but I did have to reverse the polarity on one light. Don't remember which one. Made a big difference on...
Your compressor needs to cycle on and off to stop the evaporator from getting to cold and freezing up. Low on freon could be a problem. The...
Look at the pictures above. These are examples of how other ferraichater mounted there"s. I will get my adapter plate back this week, I will let...
Here's pictures of the old and new blower motors [ATTACH] [ATTACH] [ATTACH]
Great question. I would like to know how my car got to the States. What country it was made for. It's a euro. I do know the name of the guy that...
Anyone know where to get the little white blocks that hold the metal fuel lines? I need all of them.
https://www.classicautoair.com/contact-us/ I just got back from taking my plans and blower motor to have a aluminum plate made. Will have it back...
You have to modify a plate. I will not modify the case. I quess I will find out this week if it fits. I'm going by what other Ferarichater's have...
IMO Air volume, air flow is the problem. More vents would help also. I'm installing a new blower motor right now. Spal A45. Its supposed to have...
Only several miles from me. Never been to his shop, but been by many times. So young. It will be very hard on his family.
My 85qv has only 1 door button on the drivers door and nothing attached or any holes in it like something was attached to the aluminum plate in...
Will the old plastic labeling cover fit on the new fuse box?
Nicely done I like your brackets to hold the fans. I have my evaporator out now installing a new spal fan motor. Was the evaporator dirty from the...
I followed the directions of of other Ferrarichater's with great results. Thursday I installed my new radiator and fans. Just short drives until...
Temperature out the vents is not a problem. Its the volume of air. Remove your vents and the volume of air will increase. I use R12 which is...
85 QV Euro. Mostly Racetrack gas here in Dallas. Switch from 89 to 91 octane with a little Sea Foam. Never a problem.
I took mine apart and cleaned it, works great now. I can't change the time because the little plastic gear to the stem is cracked. Don't know...
