© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I cannot speak with authority about the 812. I have a 360. On cold start, it is quite loud for the first 30 seconds or so. My car has a valved...
What are you trying to connect? One must be careful tapping into power sources that you do not exceed the circuit's current capacity. Assuming...
The Forza controller obtains its power from a 12v power source. On the 488 Pista, the kit includes a fuse tap so that you can use the cigarette...
With the 488 (not the Pista), the controller obtains its power from the existing connection cable that connects to the existing vacuum solenoid...
That is the advice I give to all my potential customers. And this especially applies to the 488 as it is inherently quieter due to the turbo...
In case you were wondering, the canister looking objects with the SF90 exhaust system that are immediately upstream of the silencer (which include...
I received a phone call today asking if I was sure that the F8 has pneumatically controlled exhaust bypass valves. Here is an illustration of the...
The vendors I am aware of are marketing the same controller for the Pista and F8 that they sell for the 458 and 488 GTB. Those controllers...
The F8 Tributo has pneumatic actuators for the exhaust bypass valves. Same as most other Ferrari’s. And as in all pneumatic actuators the vacuum...
With the Forza controller, you have three modes of operation ... Normal, Open and Closed. You can set the default mode at engine start to either...
Just FYI ... the F8 Tributo uses pneumatic controlled bypass valves. Same as the 488 Pista.
As I stated. The most important thing to determine is if you have a single or double sided key. Ferrari transitioned to double sided keys around...
Check your existing key. Are the cuts on one side only or on both sides? The FT46 / X152 keys ... [ATTACH] ... are double sided and I expect...
The stock solenoid valve for the F355 is part number 159177 and list for something like $175. This is same valve for the 550 / 575M [ATTACH] I...
This is typical on cold starts to open the exhaust bypass valves to provide more free flow of exhaust gases through the catalytic converters to...
One other strange thing Ferrari did on the F355 was to use a single exhaust bypass valve on a Y-pipe. [ATTACH] Why is anyone’s guess. That Y-pipe...
Not 100% certain, but believe the solenoid valve is same on the F355 as the 360. Might be different part numbers, but for all practical purposes...
Forza controller for the Pista and F8 is different model than used on 488.
I want to weigh in here ... The thresholds for opening / closing the exhaust bypass valves are a combination of engine RPM and throttle position....
BRE exhaust also available here ... https://forzacomponenti.com/
