© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Regardless wether cleaning additives do anything good/bad in general (or just some of them do), sure they will never have any effect on intake...
Well... from the car dynamics point of view there is no doubt that wider tracks will make a car turn faster. This, of course, doesn't mean that...
As for trading "up" to a 488 there's plenty of discussions here, which essentially boil down to: the 488 is "better" but some (like me) find it...
It's an interesting funny question... Are you asking for reasons why not to buy this specific sort of car as opposed to others (e.g. a Porsche, a...
Hi, I have had 2 458 Spider: first one no arrows, no folding mirrors, present one arrows and folding mirrors. It is the...
Same here: I find the braking performance horrible in regular driving (i.e. possibly cold brakes). Very low stopping power, feels like...
Glad that you are unhurt, and that the car is as well, but this is much less important, we know. I am following this post with great interest...
Never even managed to login here (on an iPhone 11).
For whoever may be interested or has the same issue I had: during the last service they found it, and it was some loose bolts of the driver's seat...
Same here: never at all felt this dramatic flexing, shaking or vibrations on my 2014 Spider. I can understand the feeling of flexing may depend on...
Llenroc, thanks for your time and help. Can you advice on a Y fitting with the correct male noozles to fit the open end connectors of the venting...
Ah! Maybe these... but I don't know how to remove my first picture... [ATTACH]
Hi Llenroc, sorry to revive an old post but I am right now considering a catch tank. I of course agree that there's no big need for it on a...
The front lifter is lifting the front end by approx. 40mm. By simple maths this means that the rearmost lower corner of the diffuser fins goes...
Hi, I have the suspensions lifter, and I believe it is a nice-to-have option, but remember: it is a FRONT suspensions lifter, meaning that the...
Hi chenging_r8 and oversteer, jut to put all in just one post: On the cars I have experience on, the issue is sure there well past 1k rpm, I...
This is what you are ideally looking at: [ATTACH]
Hi: definitely you can plug the vacuum hoses without disconnecting the solenoids, to keep the valves always open, they are in fact a "fail open"...
What you MUST do is plugging the hoses, as they are under vacuum, and they would be sucking un-metered air if you don't do that. They call it the...
Hi, apologize for my late reply. These are the hoses to pull AND PLUG. Capping the actuators' opened nozzles would be good, but not needed to...
