© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I assume you do the Toe, Camber and ride height first, then the 4 wheel alignment. Whats a "flan block" ? You think a 4 wheel alignment tech (not...
I'm changing tire brands and it was suggested by a fellow Chater to lower my ride height 12 mm. From my race car experience I understand...
Just grab and twist. That's what I did. Maybe a little heat with a hair dryer. BE CAREFUL
Killing Tires With a Ferrari F12 -- /CHRIS HARRIS ON CARS - YouTube I know it's not in the 550/575 category, but the scenery is amazing. Hope...
Terry, My car is a 550, not a 575. I assume all of the specs and numbers are the same. Can you clarify which Michelin tire you suggest. I think...
OK, Looks like you've solved my problem again. I guess lower the height and then a 4 wheel alignment as per the spec from the Shop Manual. What...
Terry, I like you solution. I think we have the same wheels. If you recall my car DOESN'T have spacers. Do you think I'll have to have them as...
Looks like I have a bad front tire. So, now what. I drive about 4,000 per year. Plan A, Buy 2 new front Pirelli P Zero Rosso, keep the rears...
Terry, sorry to jump on this post. On the tire and wheel subject, did you see my post re: tire pull. I hope you have some suggestions about my...
Thanks Barry, We checked the pressure and measured the tread depth across the tires. This pull started all of a sudden. making me crazy.
P zero tires. Not sure total miles, I've put 10 k. Pressure equal. Car started pulling to left on flat road.Front tires swapped left to right. Now...
New 64 Lusso. I was 19. Grandmother loved me.
I removed driver air bag to fix leather. Turned off battery at SWITCH before removal. Reconnected bag, turned on switch and now have red light on...
Sorry to say everybody was correct. The door frame was cracked and a piece of metal will have to welded etc. Not a giant issue, Ferrari should...
You'd drill a bigger hole on the 2 parts that are attached to the car, not door. Also drill the slide arm same size. What I don't understand is...
I'll my service fellow soon and I'll let you know what we mind. My car only has 35 k on it. You have had a lot of fun with 70 k. Thanks again.
Last question I hope. Do the main hinges need to be fixed ? Or is the where the pin installs. I think that's a dumb question. Not sure how to...
Thanks for the advice. When the "slide" isn't connected the swings great. Do you think that would happen if the hinges were at fault.
I need help. Driver door made a noise at both of the detent stops. Bought a new "door slide" part. Very simple piece, hard to install. Noise is...
Hard to show what's broken. I think it's the nylon sleeve. [ATTACH] [ATTACH] [ATTACH]
