© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I am working with a 1978 308 GTS carbed US car. The diverter valve is stuck in the open position and the exhaust "pops" on de-acceleration. Spent...
Can anyone help with suggestions and/or tips for removing the check valves on my 1978 GTS? I removed the air pump to get more access. The threads...
Does anyone know the part number for the two check valves? I will just take the old ones off along with the diveter valve and take them with me to...
I have put less than 1,000 miles on the car since the previous air pump was replaced. It also was a rebuild unit. It began making a noise that...
Cardone Reman / Smog Pump AutoZone Part Number 32-107 1978 Camaro 5.0 L 2BL OHV Here is the current update. I took the defective air pump...
Had the shock of my life yesterday. Went out for a short drive later in the early evening. After stopping by Von's for a quick errand for the...
I've heard at least a hundred positive comments for every negative spoken or communicated regarding my ferrari. Just yesterday I picked up my son...
I decided up upgrade to 16" wheels for my 1978 308 GTS and wanted to ask what people think the 14" wheels with new tires are worth? (I know what...
Dave, Same thing happened to me this past week. Like the previous post stated it was the nut that fell off the bolt that held the fork onto the...
Sean, Thanks for the offer. I want to get up your way just to show you the car. I dropped the car off at Gary Bobileff's this morning. He...
I wish I knew. Went by and talked with Gary. He said bring it in and they will check it out..... once it's adjusted it should stay adjusted. The...
Well I gave up trying to adjust the linkage so I took the car into Gary Bobileff in San Diego. He did the major and a few other things as well as...
I dropped by T. Rutlands this past week while in Atlanta. I picked up the hose from them for $65 plus $5 shipping (it was either shipping or 8%...
Quoted from Reuters today...
Sean, I went pretty much the same route as you. The shop had adapters that fit the 308 headers. I also went with a Flowmaster muffler that was...
Don't know if the 308 and the 328 share the same diverter valve, but his is what it looks like. Got this picture off of Ebay. My workshop manual...
Nice mil work!! I went with Magna Flow Cats. Their performance is simiular to Hyper-flow at more than half the cost of one hyper-flow; and the...
This was the only trailer available at the time. I bought the car from Rich in Ramona and needed to get it over to my place. There really weren't...
Since we don't have snow or ice in San Diego we don't worry about salt on the road. A full trailer wasn't available but the two wheeled version...
My 308 passed with flying colors (well Red anyway) today. I went with MAGNAFLOW hyper flow cats that a local shop installed. The diverter valve...
