© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here's a diagram of what the bracket looks like. Holds both pipes with their clamps and a single bolt. [ATTACH]
Hey FChat, What is this bracket supposed to be attached to? While inspecting my AC Compressor, I noticed the bracket wasn't attached to...
Grab an Autel 200 for around 60 dollars on Amazon. You can read your own clutch wear and clear codes. Talks to both motronics ECUs, transmission...
Ran some more tests today. Pressures at 2k RPM were a bit higher on the high side and a bit lower on the low side. I decided to test the theory...
99' is nice. No pre-cats in the headers to worry about.
Sorry Fernando about your cat. Not sure why they self destruct like that.
Thanks for looking that up, good to know that it's normal for the clutch to remain engaged the entire time. I really hope a simple evac and...
Doing some other searches, it sounds like the standard practice for measuring AC pressure is to have the engine at 2000 RPM and to use a fan...
Hey Flash. So I measured the low side pressure using the high side gauge. I got the same static pressure reading of 80psi. Suggests there's...
@EastMemphis Yes, Google is amazing and that link has some good info =). Thanks for sharing it. Maybe I have a bad thermal sensor at the...
@flash32 Thanks again for the reply, awesome feedback. I already had engine off readings at room temp. On both days it was LP 80 and HP 75....
I ran the suggested tests today and gathered temperatures at the compressor inlet & outlet, and also the dryer filter inlet and outlet. The fan...
Yeah, I know I can test the TGK / blend door by manually opening and closing it with a 9V battery. I can test the AC again w/gauges connected...
@flash32 Gotcha, I'll check the compressor for cycling while on low demand. What's the desired result in this test? I believe the 360 system...
Thanks for the responses and suggestions for further diagnostics. I'll do some more testing today and get back later tonight. @flash32 I'll run...
Hi Fchatters, I was experiencing mediocre AC performance in hot weather and decided to read the high and low pressures on my 2000 360 Modena. I...
Installing the aluminum vents fixed my wrinkling leather. No need to reupholster! [ATTACH]
So I tried again today, this time I powered the foxwell 520 with a usb power bank. And, viola! I was able to communicate to the motronic ECUs and...
I can't get my NT520 pro to talk to my 360 ECUs. Keeps saying "no connection"...check battery voltage etc. Not sure what I'm doing wrong, all...
I have the foxwell 520 pro as well. It keeps saying no connection while trying to talk to the 360 modules. I’m trying to clear an airbag light...
