© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
For small touch ups, I found this spray can to be a perfect color match. VHT was completely off, don't try that. Here you can see the spot I...
I believe that white milky color is the solvent in Scrubbing Bubbles attacking the paint. Maybe you used the same type I did?
Yeah, it must be this variant of scrubbing bubbles is more chemically aggressive. Lesson learned. Others out there, please don't use this type...
I tried scrubbing bubbles and I think it ruined the finish of the engine bay panels in my 360. There were streaks left in the paint that would...
Project is finished! The exhaust sounds amazing, this is what I had dreamed my Ferrai would sound like. I also installed the Forza Componenti 3way...
Yeah it sounds like a beast with the valves open. I connected the vacuum lines with some longer silicone tubing. Sounds nice and quiet with...
I like your idea of building the jig flat on the ground and cutting the pipe off so the 430 system will sit flat. I built my jig so that both...
Lots of progress today. Assembly jig based on the 360 system was finished last night (3d printed plugs and wood) Went to a local muffler shop...
Did you and spider have to lengthen the pipes (front to back) in order to use the 430 tips? I'll find out when I go to shorten the pipes...
~ 25-29ftlb
Yeah actually i think i can just re-use any m8 nut and bolt that's the adequate length. Can probably re-use some fasteners from the F430 system...
Having a pretty hard time finding this screw. It is not used on the stock 360 exhaust and is currently holding up my project. I have an order in...
Well, my 430 muffler and pipes arrived and are in very poor shape. Not sure what will happen next, but I'm hoping to get a full or partial refund...
Oh great, then I'll just leave the 430 tips on there! This project just got easier. Sounds like all I need to do is cut the four pipes to length...
I think they need to be changed to longer tips b/c the 360 bumper is farther away.
I'm hoping to leave my 360 OEM exhaust untouched so I can reinstall it to the car in the future if needed. Sounds like I could try to source an...
Anyone know the dimensions or specs for exhaust tips for this conversion?
Thanks for sharing that. Got the answer, both small and large pipe need to be cut.
Do you know if it's the small or the larger that has to be cut shorter?
Woah, those are pretty small in diameter. Thanks for the info.
