© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yes that might be true, but if i remember correctly, to replace the bearings you need to remove the shaft, and that one can only be removed with...
I think just replacing the seal can be done with the engine in place. I think the real problem would be if you also want to change the roller...
I am overhauling a 365 engine now and I will also convert the ignition to the setup alhbln describes. I'm currently working on the advance...
I think the MSD streetfire is also an interesting option. It is less 'powerfull' than the 6AL(2) but it is much cheaper, it is smaller than the...
I think that is the main reason why many people switch op something electronic like the optical sensor. I do like points and they can work...
Ok, than I would just leave it as is because as soon as you start changing dwell (or gap) on 1 of the point the phasing changes as well. If you...
That's correct but the main question would be, what do you really measure if you measure dwell angle on a dual points system. For example, f you...
I think in reality it does not really matter for a Dino. The original Dinoplex Capacitive discharge ignition does not rely on dwell angle to...
I will pick up some gears next month and than i will ask them if it would be possible to make these gears and what it would cost. Could you post a...
@Melvok: If you google: 'tandwielen nederland' there are already six companies that produce sprockets and gears, and non of them can be more than...
In this case I would also consider just walking into company that produces gears/sprockets. I do that sometimes even just because many of these...
I would still rig up a harness because measuring EHA current tells you much more than a 4 way gas analyzer can (For example warm up enrichment,...
I ordered a 'Renold Blue chain'. You can get this chain basically everywhere, it's a 3/8'' 06B-2 chain which is just a standard industry type of...
For FI cars, just hook up some fuel pressure gauges. You can mention many possible causes here but it's al guessing. With some gauges attached you...
They are difficult to repair because the electronics inside are potted in Epoxy. Best would be to replace it (if it's indeed malfunctioning)....
Thanks Arvid, that indeed sounds like a better alternative to the original chain. I'm gonne see if I can order one here at a local chain...
I'm in the process of replacing a timing chain on a 365. It came with a new replacement Renold chain without a master link so I assume it is...
I don't think that's a smart thing to do. If you have a distributor test machine (or know someone that does) you could bench test the system on...
Tony, if you have a hall sensor and a rigid shaft without mechanical advance in your distributor it sounds like a perfect setup for hooking up a...
Yes it was Dino club Belgium that got all the cars together. They put a lot of their free time into the exhibition. As far as I know all these...
