© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Removing the dash all in took a couple of evenings, massively aided by the aforementioned thread. Otherwise I would have removed too many fixings...
The plan was to change the top dash, instrument binnacle and wheel to black and retain the provenance of the original dash color. This was helped...
The shrunken dash around my passenger airbag has bugged me since I bought my 456. The color combo is great but the full cuio tan without a break...
TheShop is fantastic. I've been a member for 4 years, great set of services, highly knowledgeable, very friendly environment and I trust them...
I think it was around 250 and the wheel has 3 different finishes on it. Done as new.
Sound wheel works, Bellevue. Perfect job on my 360 starfish and my wifes Levante curb rash. Highly recommended
From what you're describing, if the motor is free just insert a long screwdriver behind the arm next to the shaft and give it a little gentle...
[ATTACH]
Sorry to hear you're having this problem. I looked at my original picture of the pump and it was the 007 part number. It was replaced with a new...
Something to consider is the shape of the sidewall...my conti's are pretty curvy and so 20mm puts my tire in line with the top of the rear arch....
20mm part number WS 020
FWIW... Four months ago I wanted Hill Engineering spacers for my stock wheels on the rear of my 456GT. Their website was not showing the full...
Thanks Michael, what did you have done? was it dash it seats? (If you don't mind me asking)
Yes it was pretty gross inside, amazed the motor worked at all. Small amount of white lithium grease
I took the sealant off and one of the wires was broken. Re soldered it and checked continuity on each motor wire. Connected back on the car and...
Update, I can't access the motor wires on the lhs motor, so I'm thinking of removing the motor and all the rubberized coating and checking the...
Correct the bottom 2 pins are black & red/black on the car side I will check the continuity in the morning No have not messed with the linkages...
Thanks Ian Update - No stray volts on pins 86 D&P Checked all 4 relays and removed all associated relays, main light, high beam low beam and then...
Well so much for feeling pretty smug:( Went to the car this morning and now both lights were dancing constant up and down. Variety of...
Thank goodness for this thread. I just went into my garage and the left light was going up and down like crazy. I thought my 456gt was...
