© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Looks like thats just south of Sausalito.
One thing to add, I use cam buckle straps to hold the decklid. Ratchet straps are ok on the front, but at the back can make lowering it to a cart...
My process as well, but I used a wire mesh from a garage storage system to attach to. [ATTACH] Then used straps to grab the deck lid, and drop it...
Do you have any place to connect straps to the ceiling?
It can be done solo and I have done it several times alone, but it requires a few simple tools and the right set up. Depending on how deep down...
I decided to go down a rabbit hole. The structural tube (in red) is what holds the supply and return pipes. It looks like there are voids...
Extra insulation either over or under the center console tunnel, this is where the radiator supply and return lines are. As well as the front...
I would expand this to the paparazzi trying to take a selfie while driving next to you, the village idiot who has no concept of spatial awareness,...
There might be some good protests coming up. They sometimes make the national news. :) What kind of car are you in? The ridge at Mt St Helens...
In some countries amber is a requirement.
Not sure if that would be cost efficient. A set of Dayton style 288 GTO seats went for $20k last year. Would probably be cheaper to have the...
Love the coil over spark solution.
My plan is to put the 288 GTO side gills on, and add a belly cover to the engine area with a clean looking diffuser. Would love to find a easy...
No matter how hard you try, there are no bad angles. [ATTACH]
[ATTACH]
Been looking to modify the "flash to pass" as a running light. Lets face it, a lot of drivers today would not even know what the flashing light mean.
I would just be happy if they brought back the drivers car. A manual, simple design, void of all the devices and sensors that stifle the seat of...
I removed my spare tire tub and had a shroud made so it would fit two puller fans. Really helped with the cooling.
You could try a rubber mallet to get it free.
The ultra sonic cleaners on Amazon are very affordable these days.
