© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just looked at my last one and they itemized all of the parts used, including part numbers.
There are multiple photos of that side and the wheel looks funny in all of them while the other side looks fine. This is what makes me...
Also, that LF suspension does not appear to have been repaired properly. Look how far to the rear of the wheel opening the tire is. [ATTACH]
Yeah, that's pretty sloppy. [ATTACH]
Here's a whole thread on it: https://www.ferrarichat.com/forum/threads/98-550-on-copart.352834/
That what I was thinking too but I just did a cold start on my 550 and the SAI pump ran for 2 minutes 35 seconds. Probably similar for a 456.
My version skews a bit more vintage. [ATTACH]
Now it has what appears to be a correct VIN on the column and a different AN. This car could tell some stories. [ATTACH] [ATTACH]
If you scroll down in that thread, you'll see that I had the same issue. https://www.ferrarichat.com/forum/posts/142347268/
My 550 has 4 fan speeds - Low, Low, Low and Noise.
It was on BringaTrailer in August 2018, but you probably already knew that. Maybe you could reach out to the seller....
Lots of good advice here. The 550 was my first Ferrari too, had it almost 9 years now. I have absolutely no desire to change it either which is...
Rears are exactly the same. [ATTACH] [ATTACH]
No problem, let me pop the rear off and measure. Give me a few minutes.
Don't know if this helps, but here are the front measurements on my '98 550. Roughly 65x14mm. I can get the rears also if you need them....
For what? 456/550/575?
Funny, I was just checking into this a week or so ago. I found that the part number on the mirror head is the same for 360 and 550. Not sure...
I should mention that the charger I use with the lighter is a Porsche Charge-o-mat, primarily because it's only 500ma output.
Yep, been doing it for years.
They're SAC (Speedline America) Monolites. I was told they're a cousin to the RAC monolite wheels made for Champion Motorsports. I can't...