© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I'm stripping a 103 at the moment and stuck when removing the potted block from the lower half of the housing. I did not drill the 4 mm hole for...
I live on the plant where a planet is spelled plant :)
I know Adrian and I also know that he is the #1 knowledge source regarding the Dinoplex - at least on this plant ;) I also know the alternatives...
The Winterburn ignition looks interesting. Maybe I give it a try for one of my 103s. However, I'd like to remove the internals of the Dinoplex...
I have a few defective 103s and think about rebuilding them with original specs. Does anyone know if the components required can still be sourced?...
That's right. And it costs the same to repair a damaged replica as an original GTO if these replicas are rebodied 250sfor example. You can restore...
When talking about GTO replicas in general, this might also be interesting. I saw these cars at Goodwood 2016. The first is a cheap replica as...
The wipers are either flat on the windshield bottom to the right or the left in idle position. In return position, they are more vertical aligned...
I've found some old photos of #4399 in the Pourret book. Don't know if they've already been posted here. [ATTACH] [ATTACH] [ATTACH]
OK, but then your post #101 shows not the real one.
I think the wiper issue mentioned by P.Singhof is interesting, because the wipers should not toggle from show to show and race to race. But it...
Wosp is said to be good by a Dino expert, too: http://www.wosperformance.co.uk/ Not original, but a good temporary replacement. They are also...
I agree with you for cars that are in an original condition, i.e. unrestored cars with patina that can never be restored to this condition again....
A few more (older) pictures of #4399 and some history: http://www.barchetta.cc/english/All.Ferraris/Detail/4399GT.250GTO.htm
Here are a few more from 2016. The engine was standing behind the GTO or LM as a spare engine in the box. [ATTACH][ATTACH] [ATTACH] [ATTACH]...
I took this photo in 2016 at Goodwood before she crashed her nose. Don't care about those cars. They've been crashed so often and have been...
Not much Dinos around at Goodwood this year. But a 246S won the Sussey Trophy on Sunday. Video:...
Congratulations, Matthias!
Proz say it's best to use a copper hammer and hammer the nut strongly until it doesn't move any more. This should be the proper torque ;) [ATTACH]
Seems to be similar to this setup: http://www.dinoplex.org/PDF/Wiring_Ferrari_Dino_246_Bosch_Optical_Pickup.pdf Refer to Magneti Marelli...
