© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I tried to up load photos but could figure it out. I'm new to posting
Not sure but it looks like maybe the cats are modified. I'm going to plug the 3rd outlet on the diverter valve and see how it goes at the smog station
Wrong part # it was 111705
I checked the 1980 GTB and it shows a since valve part number 100564. I checked the date on my car and it was built 11/1980
I think so they each have a nut on the side with a cable or wire attached to it. The cable / wire hours under the drivers side and up into...
Thanks I don't see the 3rd location for the 3rd check valve. My pipes don't have the two little pipes connecting to one. I did find a pipe from...
Thanks for the photos hopefully I'll have the emissions done this wknd and off to the smog station
Sorry the solinoid valve is item #36 in the above diagram
David great picture Thanks. The diagram shows the diverter valve is connected to a solinoid valve. Do you have any picks of where the electrical...
David anyway I can get you to send me some close ups of how the diverter valve is mounted and pics of the bracket . Looking at fabricating one
Steve I see you post a lot and sharing your knowledge, thanks for everything you do for all of us rookies
Thanks for the great info, so located the two lines that go to the engine block, the lines have screw on caps so it will be an easy fix. now I...
I believe this is for the carb 308 do you know if it's the same set up for the injected 308. I have seen this diagram but wasn't sure. I have...
Imported a 1981 308 GTSi into California from out of state & im trying to re-connect the smog emissions system. I have the smog pump & looks like...
