© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Without anymore details I would say 35-40 is where it will sell.
Yes. It's probably not the best surface for pictures. If I had taken a before and after outside it would really be obvious. Here are two pictures...
That will destroy the chrome shine. The point is to remove the blue, but keep the chrome.
Any other 355 alarm ECU and matching fobs will work. I have an extra set if you are near Atlanta and would like to borrow them. I'm sure you can...
[IMG] Here is the stuff
I took my exhaust out to do some clutch work and couldn't believe how much the chrome and changed to blue and gold. I looked around and found this...
Don't worry Daniel. This gave me time to use the anti blue and gold stuff and shine the chrome on the exhaust and cats. That Blue-job stuff is...
It could be that your clutch is completely worn down to a rivet in the friction plate. Or something is leaking onto the plate. If the release...
Yes. That was in mm. So 8.5 mm. That was in aluminum. It may be different in other materials.
In metric that's 8-9.5
Mine were probably 5/16-3/8 of an inch new. A little less now.
You could always move. ;) I have the aluminum ones which I've found mute the scraping sound a lot because of the soft metal.
I think most of my information is out there. I agree that it's easy to weed out the idiots by their posts. Also I think the owners section is...
The jump points for the car are under the right side engine bay cover. Right side if you are standing at the back of the car. It takes an Allen...
The best thing I have in my gym is my Precor elliptical EFX 5.33. I'm 6'4 250 and it's solid as a rock. I'd start with one of these. I'm not sure...
How much are those things. It doesn't show a price. Or is that because they can't be found anymore.
It's a round silver metal cylinder just past the MAF sensor. You'll see it. It's obvious how to get it out. I just took it out and the valve...
Mine did exactly this and the idle control valve was all gummed up. Took 2 minutes to pull it out and clean it. This fixed it for me.
If anyone is interested. I have an extra alarm ECU, key fobs including the red one, and the pin code that goes with it. It will plug in and disarm...
Mine were on for two days while I tried to figure that out. This was the first week I had the car. The toggle light was a tough one too. This is...
