© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Great info. I already have the liner out for easy access. I will try and disconnect the flex line and see if I can build pressure. Thank you.
No pressure build up. Pedal goes all the way to the floor. Fluid reservoir remains full. Any other ideas?
The clutch pedal on my 1990 348 went limp while in my garage (how lucky!). I have checked under the car for leaks and so far there are none. The...
I could go thru the list of all the items I have checked and adjusted in order to improve idling and still can detect what appears to be miss...
I cleared the codes on both ECUs but did not go through the complete ECU reset. Today things are looking much better: ran the engine for ten...
Applied Stabilant only to the contact points at both ends of the ignition wires. Actually the engine was running wonderfully smooth afterwards....
After changing spark plugs and applying Stabilant2 to all of the ignition wires, the rough idle was corrected at least while engine running in the...
Is it a good practice to use Techron for injector cleaning? Des it really work and if so are there any known problems? Thank you for your...
Can someone recommend a 348 ignition diagnostics scope? Pico, Hantek, etc., preferably for Mac OS. I would appreciate your input.
I had already ordered another set from Advance Auto Parts which also came without tips. I decided to clean and use the tips from the old Bosch...
Spark plugs arrived from Amazon: no tips. I guess I'll use the old ones as suggested. Thank you.
I have ordered them from Amazon; the picture shows them with the tips. We'll see when they arrive next week. Thanks for the suggestion.
I am still trying to replace the spark plugs in my 348, so I ordered the recommended DR8EIX part number from Advance Auto Parts; they did not have...
Thank you so much for the feedback. Now to decide what to do since the schools of thought are quite varied. Thanks again.
I will be installing new plugs using the recommended NGK DR8EIX part number; I have seen recommendations from several members to use anti-seize...
My 1990 348 ts is ready for new set of spark plugs; any recommendations? Thank you.
How do you lubricate the cables that actuate the front and rear latches? They are so difficult to operate now that I am afraid eventually will...
It is the protective cover for the T-top when you store it behind the seats.
Wow! I didn't know there were so many rivets. How do you remove the old rivet bodies after drilling. Thanks for your help.