© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
That's great it is so good to see reports of them being driven. I hope to join you someday. Of course since I just purchased in the fall last year...
Yes but I don't think having the paint match affects downforce :)
I used a matte black spray paint. It doesn't match perfectly but I'll probably wind up doing all the other undertrays too eventually so they will...
Here are the pictures with the finished ones back on the car. Before the repair from the side of the car you could see the crack between the wheel...
I didn't take any while I was doing it I was too busy sanding. I just put them back on the car tonight so I'll get some of the finished product.
I just thought I'd share my experience repairing the 355 diffusers. I had a small crack in each diffuser keep in mind these were minor enough that...
For me it's just a combination of style and comfort. The stock 355 seats don't have as much support. Then of course the carbon just looks cool....
Nice I love those seats I've spent hours searching for a set and all I ever find are cars for sale that have them. Congrats they are a different...
After reviewing threads on here an many other forums I went with the Bendpak MD-6XP and have confidence based on others experience that it will...
Looks good congrats! Now we need some higher quality pictures. :) Especially of the air boxes. Are those aluminum or just painted?
I've seen the threads on here and they are from a while ago, good information though. I'm close to purchasing but was wondering if anyone has used...
I have no need to raise/lower the top in the garage but thanks for the advice. I also wouldn't bother to raise/lower the top if the car doesn't...
Yes I'm in the Chicago area and it is letting it run during storage. I start it then let both engine temp and oil temp get fully up to where they...
I knew about the points in the engine compartment that's where I tried charging from that made the clicking noise. I removed the wheel found the...
I know this is an old thread, but I'm just considering this lift for my 355. I was wondering if anyone has done an engine out service with this...
Thanks again, I don't need to check voltage I know it's dead. Just wanted to verify the location before I remove the wheel and panel to connect...
Not sure yet, I still need to get to it. Am I reading the manual correctly and you have to remove the front passenger tire to get the panel off...
Thanks guys, I'll try getting to the battery directly. Yes the clicking was from the car not the charger. Worst case scenario I'll try to locate a...
Well I now have a battery problem that I'm hoping someone can offer advice on. Car sat for just over a week and with the colder weather it died....
First of all no I'm not asking the same question about codes, I've searched on here and found the details regarding the codes I'm getting. Rather...
