© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Even more of a mess now.... got the floor out yesterday and came across this, all the coolant pipes are out of the car now, the front and back end...
I ended up cutting both side of the rear arch and also in the middle of the front section. It will be easy enough to glass it all back together....
Hi all, I am ready to remove the inner tub and front and rear sections in the boot and under the bonnet. Does the rear one have to be chopped. It...
A few more pics... The original paint colour Marrone Metallic is actually quite nice, better than red in my opinion! Al Cowan [ATTACH] [ATTACH]...
Started pulling the 06996 car to pieces today, did not take long for the interior to come out, would have got further if I had not forgotten my...
Hi Phil, you should be able to get them direct from Lucas or LSUK as they are called now I think, let me know how you get on, I am going to change...
456 GT was purchased yesterday by my buddy. Had full F service history, 2 owners from new, tool kit was all there and in pristine, unused...
Hi John, the idle on the car seemed to be a bit lumpy with that method. I think there may be some crud in the carbs so will do a full strip of...
No, car is a 6 speed, Al Cowan
Hi, my buddy has the chance of a 456. It is a 1995 car with 45,000 miles on the clock. Any things to look for when viewing the car? Many thanks,...
Hi all, on 40 DCNF, which way to you turn the idle screw to richen up the mixture, is it in or out? Al Cowan
Hi all, I was sent this by Mike at Superformance. I tried it out on the good Dino tonight and it worke quited well. I think I have a blocked idle...
I have been also having the headache to balance up my buddies 246 at the moment. I have been told of 3 ways to do it, all are different form the...
Thanks for the advice as usual gentleman! WIll try tomorrow night when I am doing the carbs! Al Cowan
Hi all , is there any way to test the operation of the fans on the Dino? Whilst messing about with the carbs on the car, the engine temp was over...
H
Hi all, what is the best way of syncing the carbs on the car. I have a way of doing my buddies 308, is it the same tecnique for the Dino. Witht he...
Hi Stephen, nice to see a picture of the colour on a car, it does look very 70s with the flake through it. I will have to ask the owner to see if...
Hi all, found a 328 in the colour, what does everyone think of this, it is quiter heavy on the metalflake too. Al Cowan [ATTACH] [ATTACH]...
Jon, there is a company in the UK called Frost who do home plating kits. I have one of there bright zinc kits and have had good results with it....
