© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just so I'm clear. You check the oil with the engine off, warm, immediately after turning it off? That's what I've been doing. Also, how about...
@noahcpa Sorry I got to it first but I'm only a little sorry ;). Honestly, the smoke would turn most people off but I can do the work myself...
Well I guess it's about time I joined the ranks :) It's a 2001 Tour de France blue with Navy/tan interior. It has Daytona seats and a 6 speed....
Hi Guys, thought I would chime in here. First off, I'm the owner of Girodisc, for those who don't know. The brake line thing has been a thorn in...
Springs and pins don't really wear out. Pins can get beat up when guys are racing and hammering them in and out all the time, they never run the...
I'm no longer a sponsor here but I can probably answer the technical part of your questions without drawing too much attention from Rob... The...
Everyone here responding has it spot on. In general, if a car has ABS, you can play with pad compounds but that's about it(well unless you buy a...
You can't adjust bias on that car with a knob or anything. You could try different pad compounds to do that however. What pads are you running...
To clarify one point, we put the prop valve in Chris' setup because the line pressures dropped significantly due to the large piston sizing...
Rotational inertia has a larger impact on the acceleration and deceleration of a car than you think. People have been lightening crankshafts,...
Try doing a quick bed-in procedure, this should take care of it. Do a series of 60-20 stops until the pads smell and start to fade. Then drive...
Chris made an important point I'm sure most of you glossed over. The stock prop valve becomes useless when you install all these bigger...
A link to a quick writeup in our sub-forum. Congrats to BGB Motorsports! http://www.ferrarichat.com/forum/showthread.php?t=213144
Monday bump
Sometimes the pad transfer layer of the old pad is really stubborn when changing over to a different compound and can cause noise, judder and...
Thanks for the translation, that's interesting. The first tool that hacked the site did more damage. They inserted scripts that ran if you...
To say it's annoying is an understatement. I have restored the site three different times in the last week and it keeps popping up with some BS...
Concorso Italiano bump. If you see Nick there, stop in and check out our brakes in person.
It looks like a factory rotor that has been slotted by a machine shop. Should perform as stock with the added benefit of keeping the pad a bit...
This would get in under your budget, and we can play with pad choices to suit your needs....
