Search Results | FerrariChat
Buy

Search Results

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Search Again
Page 6 of 9
  1. DWPC
    Post

    Metal "dust" in engine bay and rear bumper after driving - can't be good

    Is the dust aluminum or ferrous (magnetic)? Start there. Something has slipped and turned into a grinder. All external rotating components are...
    Post by: DWPC, Nov 10, 2011 in forum: 308/328
  2. DWPC
    Post

    Dwell meter hook-up for checking Lambda control?

    P. 75 - Its Item (I) in the diagram for the Oxygen Sensor Control System. I'm aware of the valve in the air injection system, but since this...
    Post by: DWPC, Nov 10, 2011 in forum: 308/328
  3. DWPC
    Post

    Dwell meter hook-up for checking Lambda control?

    Thanks Steve. I was concerned that connecting in parallel to the freq valve might half or double the value. I'll make up some jumpers so I don't...
    Post by: DWPC, Nov 10, 2011 in forum: 308/328
  4. DWPC
    Post

    Dwell meter hook-up for checking Lambda control?

    Anyone??? The book mentions a Lambda test plug, but the 308 has only the round ignition test plug. ECU?
    Post by: DWPC, Nov 10, 2011 in forum: 308/328
  5. DWPC
    Post

    WUR interchange....

    +1 Larry da man! http://www.cisflowtech.com/
    Post by: DWPC, Nov 9, 2011 in forum: 308/328
  6. DWPC
    Post

    Is it normal

    The bonnet latch on my car releases fully. Since it opens towards the front, no need for a safety latch.
    Post by: DWPC, Nov 9, 2011 in forum: 308/328
  7. DWPC
    Thread

    How do I access the ECUs without damaging anything?

    It may seem trivial, but I don't want to do anything destructive. Do the carpet and false floor in the rear trunk just snap/pull out? Are there...
    Thread by: DWPC, Nov 9, 2011, 0 replies, in forum: 308/328
  8. DWPC
    Thread

    Dwell meter hook-up for checking Lambda control?

    Can anyone tell me how to hook-up a dwell meter to check Lambda control on a QV as described in the the Probst book on Bosch CIS? The book is...
    Thread by: DWPC, Nov 9, 2011, 12 replies, in forum: 308/328
  9. DWPC
    Post

    What's the best way to replace the WUR

    Easy! It took me about twenty minutes swap out the old WUR with the rebuilt WUR from Larry. Remove two nuts on the intake manifold, unplug the...
    Post by: DWPC, Nov 7, 2011 in forum: 308/328
  10. DWPC
    Post

    308 QV Engine Compartment Photos

    Steve, I think others like me would be interested in reference pics fro your car. My hoses are a polyglot of braided and smooth replacements that...
    Post by: DWPC, Nov 7, 2011 in forum: 308/328
  11. DWPC
    Post

    328 auxillary air valve

    The layers of analog-mechanical complexity of the CIS add-ons necessary to comply with emission limits for the first minute or two after start-up...
    Post by: DWPC, Nov 6, 2011 in forum: 308/328
  12. DWPC
    Post

    What's the best way to replace the WUR

    Thanks Larry...as you see I got the unit this afternoon.
    Post by: DWPC, Nov 4, 2011 in forum: 308/328
  13. DWPC
    Thread

    What's the best way to replace the WUR

    I received my rebuilt WUR and it goes on tomorrow. On my '85, it looks like it may be simpler to remove the WUR and its bracket as a unit than...
    Thread by: DWPC, Nov 4, 2011, 5 replies, in forum: 308/328
  14. DWPC
    Post

    328 failed emission test, advice needed

    What did it fail? CO? NOx? HC? Did the shop ask to see the test printout? Did they test the O2 sensor before replacing it? Did they do a fuel...
    Post by: DWPC, Nov 4, 2011 in forum: 308/328
  15. DWPC
    Post

    Record price for 328 keys?

    Now that's silly.
    Post by: DWPC, Nov 3, 2011 in forum: 308/328
  16. DWPC
    Post

    Adjustment of K-Jetronic on F328

    Yes it will. My idle will go below 500 RPM on the tach if I let the engine bog down from idling rich when cold, which happens occasionally. I'm...
    Post by: DWPC, Nov 3, 2011 in forum: 308/328
  17. DWPC
    Post

    Fuel Pump Safety is inoperative...where do I look to fix it?

    Thanks Paul...very clear. I disconnected my return line to check for obstructions when I did a fuel pressure test. Having seen the volume of...
    Post by: DWPC, Nov 3, 2011 in forum: 308/328
  18. DWPC
    Thread

    Fuel Pump Safety is inoperative...where do I look to fix it?

    My fuel pump comes on when the ignition is Position 2. The connector for the safety on the fuel distributor is in place. I want that safety to...
    Thread by: DWPC, Nov 3, 2011, 2 replies, in forum: 308/328
  19. DWPC
    Post

    built in CO2 fire supression system

    The difference between 308s and other cars with engine fires is the position of the gas tanks. Very safe in a collision...but not in an engine...
    Post by: DWPC, Nov 3, 2011 in forum: 308/328
  20. DWPC
    Post

    awesome ebay sale must see

    At least he's honest about it and not advertising it as an F-car, as these things usually are in their ad headings.
    Post by: DWPC, Oct 31, 2011 in forum: 308/328
Showing results 101 to 120 of 180 Next >
Search Again
Page 6 of 9