© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Ton/Mark, If this is what I think it is (64414900) the original bolt was made from just plain carbon steel. We made a replacement for these out...
Martin, The conversion process on the Aluminium produces a non-conductive layer - The snap ring is a bespoke design developed by us for use in...
Martin, You have sent me an email at lunchtime today asking these questions and I was just about to reply by email. The outer is Aluminium like...
The surface ground face should have been the give away - In fact I think you can see the discoloration on the chamfer to the bore showing that the...
I'm really going to stick my neck on the line here and say that the CV outer doesn't look quite right? - You would "normally" see the induction...
Ferrari did register the design (Design # 2023594) at the IPO in London Here is the link to the bibliography page that has a few more drawings....
http://www.engineeringtoolbox.com/moment-inertia-torque-d_913.html Moment of Inertia (Mass Moment of Inertia) - I - is a measure of an...
Reducing rotational mass - A heavier carrier would only add to the moment of inertia which is something we would always try to reduce without...
I have a friend who last year was involved in freak accident where the car ended up hitting a tree sideways and is now very sadly paralyzed from...
Out of interest we have 3 x 308 race cars that have been running on these bushes that we have developed that comprise of Stainless steel and a...
In production as we speak ! :) [ATTACH]
http://www.fastener-express.com/index.asp?PageAction=VIEWCATS&Category=386 Not sure what size you are after but there are a selection listed on...
Shocking .....
Scott, You are more than welcome - I personally take great pride and comfort knowing that we are helping the Ferrari community one way or...
Stainless steel wire thread insert should be in the original part - we obviously did the same. How about this for a teaser - I'm not saying...
Just out of interest what was the runout of the shaft like after welding ? Paul
Some points to be noted here There are two types of bearing avaiable from Ferrari UK Both are SKF manufactured 105206 - Zinc+colour pass outer...
This is the OE part that is a lot cheaper http://www.hillengineering.co.uk/catalog/123277-p-148.html Do a search - about 5 years ago I posted...
Apart from the colour change and wheels... :) My 240Z has been in our family since 1974 - Concourse winner at the Japanese Auto Performance...
Parker, Sorry to hear about your problems - I would look at the minimum of getting you existing skid plates machined with a trailing edge all the...
