© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
100% correct! Its one of the typical Valeo OEM Ferrari parts. (It should have Valeo stamped (quite small) on the front casing)
Have another look - Unfortunately we have done them for the last 3 years but its only in the last 2 weeks that a lot more bits have been added to...
Indeed :D [ATTACH] [ATTACH]
Another way - Hank Bushes - very common part in the sheet metal industry http://www.rivetwise.co.uk/productrange/hankminisert.htm [ATTACH]
The harder you push yourself the harder the instructors push you - I done it about 2 years ago - fantastic day. Must agree with the JP1's -...
If you look in the SKF handbook they will tell you that 6000 series bearing (6011 falls into this category) is ideally suited for rotational...
We actually done the drawings for these back in 2005 but never went into production because of the 575 vents. Its not the easiest of items to...
This is a 550 wheel on a 348 - The 456 wheels have about 8mm less offset and would push the wheel out even further :( Paul [ATTACH]
Drew The motor has no end stops and you do not need to worry about orientation. Its that easy! Paul
:) [ATTACH]
John, Can you take photos of the other part of the broken bolts - a high res of the threaded area would be great. Why is the disk wet on one...
ROFPMSL :D
It is very difficult to tell at the area that is damaged but the effective diameters all measure within tolerance at the rear of the thread where...
Pap. PLEASE - check your front wheel bolts - I take it they are the old Ferrari ones? Paul
Please use this new thread for technical discussion. http://www.ferrarichat.com/forum/showthread.php?p=136959359 Thankyou!
From an engineers view these pictures speak a thousand words, in layman’s terms these thread are showing severe damage to one of the most...
Time for a few pictures from our Shadowgraph - the black shadow is the profile of the bolt. [ATTACH] [ATTACH]
Seeing that we had the bolts segregated into two sides it was very easy to see that the LHR bolts had very visible damage to the fronts of the...
I have started this new thread on this subject as the last thread (in places!) became completely out of hand. For reference here is the link:...
Looks like it was the original Ferrari bolts that were on the car - There are bolts with threads missing - bolts with severe flank deformation -...
