© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
What you will also notice is that the clearance between the transmission and the trunk panel is very small. [ATTACH] When I first tried with a...
Hello From what I have done I would recommend you to not lift the car to remove the gearbox. I have lift it to remove all the bolts and stuff to...
Hello I am in the same boat as you since I have a whinning noise on my T and I am currently digging into the transmission. I would be curious if...
Hello I may have a biaised opinion on this topic but I will give you my thought! I say biaised since I own a T and I DIY all the mechanic. When...
Hello Thanks :) Yes I try to do it smartly and doing some custom things when possible.. Yes you are right. I am keeping in mind these flakes.....
Hello I have finally managed to remove the clutch shaft by using a gas radiant allowing to heat all the transmission quite a lot. Here are some...
Hello For me it is only bad photo but I will have a look at it again. Well I tried to extract the clutch shaft using a bolt extractor I...
Hello I replaced mine 0 280 160 715 with the AIRTEX/WELLS 5G1128 from rock auto, a bargain, even shipped to France!
Hello I have seen some threads here dealing with failed side bearings and I think mine are a little shot also since the balls are not very nice,...
Hello Thanks for your input. I have read many times issue with this bearing indeed. I don't know if it the cause of the noise since it is...
Hello I don't know if it is the same as the one on a Mondial T/348. If yes it is a Delco CS130 and I bought a 1116411 (CARGO 131905, aka D411HD)...
Hello So I finally removed the transmission after having some trouble with the trunk behind it (and also doing the timing on my other italian...
Hello So yes one can remove the transmission in situ on a Mondial T :) [ATTACH] To do so, I had to let the powertrain go lower after having...
Hello I have had a first attempt trying to remove the transmission from the car (everything in situ). I was not able to remove the gearbox enough...
Hello Thanks for your input. I am asking this question since I understand my TOB and flange are not compatible (also seen here:...
Hello After having sorted out the engine issues (discussed here before...
Hello I was wondering if by removing the clutch I can have a feeling if there is any anormal play in the input shaft, as a first check? Can I...
Hello I have the feeling it is linked to engine speed, since I can also hear it when parked in neutral. (some more info here...
Hello My AC belt is removed since I think it isn't working anyway, will have to have a look at it after. I will check it but have the feeling it...
Hello! Some news from my side. For those who haven't seen my topic in the technical lounge, I have done the following things: -alternator...
