© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Also yes the lights on the mode selectors illuminate with the instrument lighting. Also pin 9 says it's the rheostat input. That is from the dimmer.
So eric asked me to trace the pin 25 line inside the TCU. Traced it as much as I could. Didn't see anything out of the ordinary but then again I'm...
I will check this out. Maybe pin 9 is not giving the proper resistance it should. Do you have any wiring diagram for the mode selector panel??
I have tried to change gears through the paddles with just ignition on with the mode selector panel disconnected. But nothing happens.
Would be so helpful if I could get another TCU to just check this and verify if that's the problem before purchasing a new or used one. New ones...
Yes they are. I didn't know that only US models came with this. Also have a look at post #114. I quoted wolfgang from the other thread. Might be...
I will definitely check this out today. Its been more than a day since I have turned on the ignition since yesterday was sunday.
No thats not the case with this. I think OBD only came out with the 99 model I'm not sure. It is definitely not there in my car because I have...
I don't think the 97' came with and OBD socket. If you mean the individual sockets for various control modules then I have checked with them...
Yes my brake lights work.
No I have not done an engine out recently. After my previous engine out the car ran fine. The car had been sitting for well over a year after...
I was reading through that thread and found this. Since this is the case maybe my software is faulty somehow and that is why the TCU isnt...
Honestly I don't know about it flashing when you initially turn it on because i have had this fault for so long I dont even remember if it does...
Yes and the reason its staying lit is because it has a display control error stating short circuit to VBAT which is happening on pin 5. But we...
This isnt a USA or GB model. It's a europe model. and also yes I have checked all 3 relays that sit beside the TCU.
No problem. Mr.eric has done the same test and measured what was needed. He was getting the same values I did.
Yes pump kicks in and out and pressures are all good.
With everything connected and assume the car is fully fitted and everything is in its place, I turn on the ignition and get the 3 or 4 buzzer...
In my case it doesn't flash at all because the short to VBAT error is always present. Due to pin 5 of the display unit. Also when I check my...
He meant to ask what all F1 related lamps come on with ignition. Also for some reason Ferrari has named them as ' Low friction warning light' ,...
