© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I called T. Rutlands and they say the 115019 sensors are NLA. Looks like I will have to cut the wires and change the connections on the 119052...
Wolftalk, I am located in San Jose. Thanks for the correct part number, I will call Rutlands to see if they have the correct ones and swap out....
OK guys....I have changed out every component mentioned in the chats: Symptom - 1980 308 GTSi misses/stumbles at 2800 rpm to 3200 rpm. Also has...
Awesome....Sat morning works for me! I am still doing a little bit of work on her, but hopefully she will make it with out trouble. I am having a...
Hey guys, I'm new to the San Jose Ferrari scene. I have a 1980 308 GTSi. Do you guys hang out with the older cars also, or is it mostly the new...
I am ordering TDC sensors today.. I hope that is the final fix to the miss at 2800 to 3200 rpm! Should I also get injectors? Are the seals...
Birdman..TDC sensor check is next. I was trying to do all the easy stuff first. BTW, today I took out the ECU's and cleaned all the bolts and...
OK...I changed the spark plug extenders and put on new wires. I used Taylor Spiro pro 8mm and they fit perfect. I put a thin coat of Dielectric...
I sold my 85 Mondial for $18,500 and it was in bad condition. I bought it sight unseen on ebay in December with out checking Carfax......and I got...
OK...I will change the wires, clean the disty capm and put new extenders this week and see if that helps. I will post the results as soon as I...
OK..I put on the ground wire. Seems to run a little better, but still misses between 2000 - 4000 RPM. The tach is steady now and idle is better...
One of the best is One Off Design in Santa Clara. Robb Robinson and his team have won many awards at various major shows. He only does resto's and...
Well..I got the car away from my"mechanic" after only three weeks! We used after market Cats and had the threaded nipples welded in like the OEM...
I pulled the #1 and #7 plugs and they look good - tan in color. They are Bosch plugs. I ordered the NGK "6" plugs from T.Rutlands which will be in...
I finally got my car away from my mechanic....who did not fix the problem at all after new cats and a nice labor bill!!! Lesson learned. My 80'...
I should have come to the chat before going to an unknown mechanic! I am getting the Cats installed tomorrow and all the tubes, and air pump...
Yes, the recirc tubes were capped off at the injection box and the tubes removed. It did pop on decelleration as well. I just had bought the car...
1980 308GTSi - I had one cat that was bad and blocking my exhaust on the right side. So my mechanic removed both cats and installed straight...
Thanks guys....So I did some investigation at the Chevy and found out the the 78' Camaro has the exact same air pump. I went to Autozone and...
I am trying to get my 308 GTSi ready to pass CA emisions and found out that my Air Pump is seized up. Has anyone tried to rebuild these pumps? It...
