© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
You're going to love the CS exhaust. It apparently sounds similar to the 430 exhaust installed on a 360, which also sounds amazing.
Shows up as part #2 on the part diagram. My car didn't have it. [ATTACH]
Added UV dye to the system and refilled with 500g of refrigerant per the WSM to try to find the leak. Could not find any visible evidence of a...
that’s pretty funny...I am definitely closing the manifold valve on the low side and also the ball valve on my yellow line going to the pump (just...
The 50 dollar vacuum pump I bought off Amazon is now my best friend. I can pull around 27-28 in hg, but it doesn't hold. Drops down to 10in in...
System was evacuated this morning and it’s very low on refrigerant! Only 1lb in the system. Spec is 750g or 1.65lb. [ATTACH]
Thanks for the reply. I guess I’m out of luck to fix it the right way to make the bracket original again. (I don’t weld). I’ll try to fasten a...
Thanks JD and everyone for asking questions and sharing info, really awesome learning experience. Flash, related to your question about oil...
Anyone know how they are supposed to be fastened to the chassis?
Feels a bit high. Installation is typically <$200 for all four wheels unless you go to a high performance shop that specializes in custom...
Went for a drive today and noticed my AC felt colder than before. 90g isn't a lot, but I wonder if it actually made a difference in vent...
I was considering a Robinair R3. Do you think this is a good beginner recovery system? It gets great reviews for small AC systems like cars.
I think you can find plenty of smog check places in CA that don't know the difference between OEM and aftermarket headers. "what's that?"...
Maybe you're checking the fluid level under the wrong conditions? As specified by the TSB, you're supposed to check with the engine off and cold....
I installed a different 430 silencer yesterday. No more dents! =). If anyone wants to buy a dented, but perfectly functional silencer, please PM me.
F1 fluid level is like the amount of water for a pot of rice. Stick your finger in and fill the liquid up to your first digit. For F1 fluid,...
I have the smart relay in my 360. I noticed shifting got a little smoother. Worth the $400 just for that IMO.
I use the Valvoline full synthetic. Same color, must work? =P
Access to the bottom is required so you can hold the nuts in place and torque down the pan head screws on top. There's no access to the bottom...
I will second that...you really want to consider replacing the headers before they completely fail. The pre-cats are metallic construction. If...
