© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I thought sure I read a few years ago that the blue paint was to identify LHM
I did replace my front pads a couple of years ago but do no remember having this problem. Make sure to check the Aluminum upper a arms as they...
I recently had the same problem with mine. The wire was in tact, but the insulation had fallen apart. I was able to salvage it by cleaning off...
QP III engines are 4.9 and most only bolt up to a Chrysler auto matic trans. There are a few that were manuals. The 4.2 most used the 5 S20...
The Maserati factory has the records that will let you track the car number from the internal engine. Contact Fabio Collina at the Maserati...
Yes thanks for your response. The housing is the part he needs and I have been looking for six months. There is a set available in Italy so maybe...
I have a friend that needs a tail light housing and lens for the driver side of an early Mistral. I am sure they are all the same. Thanks
It looks to me that it is a Maserati Bora or Q Port III jack. It is missing the handle and extension. I think it is worth about $300 if the bag is...
Thanks Ivan. I have a spare engine and you are correct it has a number stamped on the back similar to the 3500s. And in this case it does match...
Perhaps you are talking about a different lower engine number than I am. The number I am referring to is located on the left front of the engine...
The bottom engine number is not the same as the number on the chassis or the number on the head between the valve covers. That number can be...
Ivan I have one of these manuals. The cover is in poor condition. In fact I did not see the gold Maserati imprint until I saw the pictures that...
The setup to accurately measure the cam timing is not that difficult. You need a degree wheel and a dial indicator. The degree wheel is bolted...
I hope this came thru OK i checked the file and could open it OK but with the changes in this system I am not sure everyone can. BTW we do have...
Sorry for the slow response. Moving to Idaho was a big project for an old guy and I have not spent much time looking at my computer. I still...
Walt, I have a manual that I believe is a factory reprint. It is the correct size and in two languages and has a brown cover, where the original...
Walt since you are in the SF Bay area there is a shop in Walnut creek that can service your wheels. They also have the ability to balance wheels...
The Wilton wool is not correct for the 3500. A very few cars may have had Wilton wool specified by the customer when the car was built . most of...
Ivan thanks for posting the information on the power steering. Very good information
I know some taller people have remounted the seat rails to get more room
