© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Do a search on this site. There are several products that work well
BTW Wilson passed away Dec 8,2017. He was a great enthusiast for both cars and airplanes
On my car a1968 it is mounted on the passenger side about half way back in the engine compartment.. I believe the parts book also shows this location
Great video,Thanks for posting Frank. I also enjoyed the video on the 3500 Vignale Spyder
Even a small battery should be OK when new. I would check the ground and the connection of the long cable to the starter. I fit the largest...
I have a set of 3500 rods that has the short bolting side and weigh about 870 gms. Your pictures did not come thru so i cannot compare. If you...
The parts book list the same part # as the Ghibli a 10 1/2 pressure plate. The clutch disc has a different part # than the Ghibli. The parts list...
Yes that is the way i read the info in the parts books.
From the books i have which are the parts books for various cars you should have 3 of the item # 1. THe assemble is part #1, part#2, Part#1, air...
Mike it has been a long time, but I am sure i was able to use a socket and a long extension and loosen it from the front. The problem is you...
Thanks for posting Bob, It is so rare to see Maserati GTs in the Pebble Beach event. It truly is the greatest Concours I have ever been in.
There is a vacuum diagram for the US cars on Table 3 of the us supplement book that might help
Yes the hydraulic pump belts need to be quite tight. Since yours are slipping I would replace them. and clean the pulleys. But they are probably...
The one I use in the 6 cylinder engine is WR6DP. The newer number for the same plug is 4225 or #0 242 240 521 052. If you use a pertronics...
I had problems with plugs fouling in both my 3500 and the Mistral. Since I change to Bosch Platinum plugs over 10 years ago I have not had any...
The ones I purchased fit my Bora front just right. I still have the one I took out of the left front and it is an exact match for the new one I have
While i do have a spare I believe these are the same as Fiat 124 . i bought a couple of new one from Chris Obert in Santa Cruz several years ago....
My 69 4.7 has two 60mm chrome pipes and they are spaced 12mm apart
MIE does sell a bellows for the shift mech on the Bora.
Yes I had a Khamsin with automatic for 25 years # 1124. I remember seeing Jims car from Canada but I did not hear the story or know anything...
