© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi all, Well I am getting very close to see if the past two years are going to pay off or go to waste. I have finished all the plumbing, and...
Joe, I don't have the wiring diagram for your car, that being said, I would do the following: 1. Make sure you have 12 V to the starter. This...
Hi Urs, Thanks for the input, always valuable. After reviewing the wiring diagrams I concur with your diagnosis. I will leave as is for now, once...
Hi all, Had some surgery on my arm so not a lot of progress in the last month. Have been able to work on integrating the F.I./Ignition ECU wiring...
Brooklands, I installed the hoses from the rear, apply liberal amounts of silicone grease to the front six inches of each hose, push into the top...
All, Speaking of sunroof parts, my colleague has the production bits ready for distribution. He has basicaly a kit that contains all the...
Hi All, Well I took a few days from the coolant pipes to ponder, and calm down. My friend came over with his production ready 3D printed sunroof...
Joe, Urs, I agree with Urs, that the pipe Joe has is from a cab. I am going to check and make sure that mine is not reversed, or is it is just a...
Joe, Urs, Thanks for the responses. I think I really screwed up, but don't know where. The 90 deg. pipe at the t-stat, I did switch ends, in its...
Well boys, I screwed up! Any guesses as to what I did wrong? [ATTACH] [ATTACH]
Guys, I used 3" Eibach helper springs, they keep the main spring in place when the suspension is at full drop. Yesterday I had weight on my...
Hi All, Been awhile, so here is latest update: Radiator was re-cored, and installed, all new coolant hoses, new electrical main cable, new fuel...
Got her done boys!, again many thanks for your help. Will get the back tubes finished, put the headers on the lump, and get it back home. Regards...
Guys, Awesome help with the pics! Now that I know it is just a wrestling match, and that I have the correct parts, and routing, just a matter of...
Motor is done, just trying to get all the little things buttoned up before I can put it back in. I am struggling with that aluminum pipe that...
Joe, You are awesome Brother! Just what I needed. Thanks so much! Regards Jeff
Hi All, Getting all my new coolant lines hooked up, and I am confused. The workshop manual section C8 fig. 9 shows the bottom hose thru the...
So last piece of the sunroof puzzle has been received from the machine shop. [ATTACH] [ATTACH]
Agreed, I always fill them with water.
Tanks are stripped, ready for some welding, and pressure testing The in tank filter is toast, and apparently no longer available, so will be using...
