© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Good photo. I would have guessed something in the range of 300-350N
I also agree with the description in #1 I found if you lift off the throttle completely when doing the downshift and then reapply it seems to be...
Without doubt Ricambi is an excellent choice. But I'm in China, and there is a shop that sells gas struts not far away. So if i knew the 'lbs' or...
Would anyone know the "lbs" rating of the gas struts that hold the front bonnet up ? Has anyone used the struts from "Lifts Support Depot" on...
There is nothing in that ECU area that can make the sound you describe. That sort of sound seems more typical of a hydraulic pump running dry eg...
LOL I may have skipped to the engine bit. Found the bit were you mention it's working. Wooden ride = for me that was the pressure balls needed...
Does it have OBD or is it an earlier one. If not OBD, let's play find the diagnostic connectors and how to get the rear underfloor spoiler to work.
It's not the wheel that will flex, it's the wheel bearing as it wears that will allow movement. Ask anyone who ran a Corvette GT3 what item they...
I am now suitably enlightened. @24000rpm - I sent you a pm.
Does anyone recognize this type of disc hat ? 1) if yes what's the details of it ? 2) Are the mounting holes the same as the 360/430 road hat or...
The R-Tuned engine panels fitted just fine. Only 1 hole didn't line up perfectly and that may have been the bracket being a bit bent. Yes, they...
The disc hat on the challenge is 10mm shallower than the road variant. Hi-Spec in the UK will make you some hats.
May i also suggest you speak to Lenny at "MD Clutches".
If it was the TOB or the union block you would have fluid on the floor. Now, i understand that it's not unheard of that the accumulator can be...
I can not speak to the 355 with accuracy but let's assume the 360 is similar. The slow priming/motor burning out are but symptoms of a problem....
the mess on the desk would have given the clue. Made it. Now need a guinea pig ecu to test it on.
'One cable to rule them all', well perhaps just 360s will do for now.
How is progress with the larger valves?
Working on getting the pin. Other than the ECU Doctor device, are there any other methods to by pass the immob. ?
Shout out to Taz who understands the temper tantrums of the immobilizer better than most. re. 456GTA. Engine would start last week but not this...
