© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Charles, Open your boot (front trunk). In the back, just to the left of cabin air cleaner is a four-sided cover, held in place by three thumb...
Of course, doing it yourself means no compression check (which might be important on a higher-mileage car) or anything else that requires...
PS, Otakki, You could try Autosport Seattle. They might be willing to do a PPI, but more likely they might be able to recommend someone....
Perfect, Justin. Agree totally. In case you haven't bought a car like this before, you will get to a point where you have to decide whether an...
You still might consult the vendor. He just might be accommodating. If you even need some help with it, that is.
Otakki, I bought Izzy from FoW without visiting it, relying on the integrity of the dealer (I know, I know) and that of Competizione. I got a...
You said "new" tires. Did they include road hazard protection? Ask the tire vendor. That said, if the hole is not leaking (try soapy water on...
Yes. I bought a 2007 430 from FoWashington and had a PPI by Competizione and Sports Cars in Gaithersburg (great job, by the way). Came back with...
OK. I understand, now. Thanks
I didn't know you could still get a tune-up on these cars, or anything newer than the 80s. What do they do, exactly? I put the...
Glen, Thanks for the input. I put in the Fabspeeds (with blankets) plus Novitec cats, muffler and tips. Everything is OK except I get the...
I was wondering if my OEM MKIIs, now removed from Izzy and replaced with Fabspeeds, had pre-cat elements that used a metal substrate or a ceramic...
Autosport Seattle. Fair pricing. First class work.
Boca, On my 430, which I believe to be totally stock, the outboard area of the bottom of the front bumper has a clearance of 5-1/16 (129mm)....
tvoismo, I got a Coverking cover with a bag through eBay ([email protected]) for my 430 for $310 with free shipping. It would probably...
Soop, One of the first things I did to my 430 was to repaint the bottom of the front bumper and both rocker panels because of the scrapes on...
Mike, I have a set of WeatherTech floor liners for my 430. They are floor LINERS because they are in the shape of a shallow pan and will hold...
Elad, See my post for an alternative:...
FBB, Steel studs into aluminum: just a few inch-pounds to make sure the stud bottoms out in the hole. No anti-seize and no threadlocker on the...
Dave, I have a full metric set of the Snap-On CG500 stud removal tool: housing and all the collet sizes for my 330 2+2 which also covers my...
