© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Unobtanium sells them https://www.unobtainiumsupply.com/
Mine did.
Correct you need that rubber gasket otherwise when you release the bonnet the latch open and closes and the bonnet stays put. The gasket applies...
Have to make it. General bushing diameter is 30.5mm OD and 23 ID and 29mm long. [IMG]
And NOS, two bottles, the big ones.
I heard its 65K miles or 15 years which ever comes first.
Ahh so you stuck a 348 engine in there then. :)
if you let go of the button it stays where you left it. Goes down when you tell it to go down. But without stops its not save to be under there,...
"hose 230cc injectors may well flow a lot more at the 3.8 bar" Ohh yes you bet they will. There are several 215 cc injectors out there and at many...
Ok so here is the injector, 230 cc/min. I paid $25 a piece from injector reseller, plenty for sale reconditioned, also available new from Rock...
Same part number, same threads. Righry tighty, lefty loosy.
I got some injectors on the way that i will send to fic to verify. Also have new 90 ms chips coming. I am 100% sure i can get 330-350 hp with...
Happens at a stans still while not movig? Pull The clutch and have a look it's possible you broke a pressure plate finger for exampme.no way to...
Yep 1 post, my bet is a troll. Yes 12k is fine of its at dealer, no for an Indy shop but with the OP and 1 post.... that's a troll.
The rear axles are inches from the catalytic converters that are well over three hundred degrees Just for them to start working that is, they get...
well stock ECU yes but with updated chip. Spider map and add 10% - 15% more fuel above 4k. There are a few 330-350 hp 348's on stock injectors...
