© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Looking good, real good. :)
More info here below. Many threads on this going back over 10 years, Here is 1 example....
I go into third or second or both then into first. Rowing gears. The gears are not aligned and moving parts of the transmission have stopped. Put...
I bought new Elring gaskets for the 348 and did not have to punch any holes. The manual torque specs and procedure is indeed correct and does not...
Many people have used them for the 348 out here.
Yes Try Leatherique, my seats were hard not soft and supple. I put them under a blanket with a space heater to warm them per instructions You...
I have a spare in the original box. :)
Dunk the rims in b12 to strip them, media blast them, tape the face, powder coat the non taped parts black, bake it at 240 degrees till it flows...
Those are Jeep Cherokee wheels. :p [ATTACH] In all seriousness they are OEM wheels with the inside blacked out with powder coat.
90% of Lucas products are snake oil, its a marketing organization. Lots of tests on BITIG going back since late 90s where their oil additives...
I used it once in my 348. I don’t know if it helped but I’ll tell you what it did do, it foamed my oil. now I only run this...
Well they change the model numbers but I suspect it maps to the 5000TL it adds an extra 3" lift. Few years back they had a 3000 which was just...
I put my #1 piston true TDC with crank degree wheel, then I set the cams to line up the timing marks using the cam pully pins, confirmed nothing...
Another. [IMG]
I have a post showing clearances several actually. [IMG]
Agree I did a major with one. That one you show will not hit jack points. I got the Xl version. Use supplies blocks and you can remove an engine.
I have a new hill TOB, full AP Racing clutch assembly, new Motul hydraulic fluid, factory Shell Spriax gearbox oil, new triple seals, lubed shift...
Repaint in red, it looks better, have not seen it affect resale either. It may help for some cars that are more drivers actually according to BAT...
My thought is you need the same unthreaded bolt shoulder. Try bell metric or McMastercarr. I ordered factory studs for my engine when I rebuilt it...
The hood vent is different, The creases I think are also deeper, outside of that they are the same as far as I know. People have put 355 hoods,...
