© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
picture please
yes but 575 is different and the WSM is sufficient. I am now putting it all back together and finding some parts need replacement, like fir tree...
well I got to the point of removing the dash and discovered that the front air duct is riveted to the dash, not screwed on per WSM. So I decided...
here is the what each end of the sheath needs to have, a fitting that is correct length for operation. Mine are broken at each end. I may end up...
you do not need to remove airbag or steering wheel to acess nuts and bolts for dash tweeters not accessible. In fact once you remove the dash...
Yes, I saw those. They do not have the end fittings. I will remove the motor tomorrow to get a better look.
from what I can see there is clearance. I will lower my passenger seat to lowest position tomorrow to check I will still look for replacement tube.
T 25 I would mount that motor directly where the cable feeds in, maybe need an offset and a very short cable. I think the tube and its end...
I see no reason for the cable in the tube. The tube has built in stress going over a bar near the motor. The passenger tube has cracked at the...
to remove motor, you need extra long t25 torx, I ordered some 12 inch shaft length from amazon there are 4 wires to motor large white and...
yes, motor B is for rear of seat height adjustment, not seat back. seat back motor is in seat back
thanks, Dave I have the WSM and proceeding slowly.
here is a pic of my motors motor C is forward section height motor B is not really connected as the tubing has broken off at each end, I think...
The seat is removed. The front section of the seat goes up and down and is in the up position. The rear section does not move and is in the down...
all movements work except height adjustment for rear part of seat. motor just hums, not clicking, no movement. any ideas?
So how can you tell it is not HGTC ?
The answer is yes. here is a tip for removing/installing the dome section. Loosen well but do not remove screws 7, 8, 9, and two of the three...
thanks
I am working on the car and considering changing my tweeters. The WSM dash removal steps say to remove the tunnel cover. Is that necessary? I...
Brian, I am thinking of removing the dash to replace my tweeters. The dome came off easy enough. The WSM says to remove the tunnel cover. Is...
