© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
and a 24 mm spanner to hold the fitting...... Good luck
Try this address for the plastic pipes and banjo fittings...
Hello Burky, You need a 27 spanner to open the nut, and a 24 mm spanner to hold the union screwed in the engine. Once the dipstick removed,...
during a routine check I found a steering rack shockmount damaged, After removal of all mounting hardware I found as well some bushings damaged...
I would recommend you to put your car on jacks and check the ball joints (in red on the ipc figure).the most of the time the problems are coming...
This is a FERRARI and not a Mercedes or an Audi I would choise yellow with black Ferrari script
As you can see the metal was not damaged [ATTACH]
I used plastic particles to remove the dirt and the paint, no sand, no chemical paint stripper was used. Bellow you can see a mifold, the paint...
Now once installed [ATTACH]
On my 328 I repainted both covers [ATTACH] [ATTACH]
Personally I preserve my 328 during the winter as follow: - Replace the engine oil and oil filter. Burned and black oil is corrosive and will...
Good news, I received and installed an exchange WUR 0 438 140 132 on my 328, I think Mr. Larry FLETCHER will recognize the WUR he rebuild. Now...
You can use a chemical called ''Frametaux'', to neutralize rust. Install a bonding wire between the tank and the chassis (a ground) to prevent...
+1
You are right, normally it is a fiber gasket similar to those used at home on the shower, faucets or water fittings. I installed copper.
I think the gasket you are looking for is the same as those use on the gearbox or engine sump plug You will get it for 1$ at Alfa Romeo shop
