© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
You are right. Something went wrong in the copy-paste operation. Here is the correct link:...
Does anyone know more about this Swiss 512BBi offered by DK Engineering? http://www.dkeng.co.uk/sales/blue-ch...839307%29.aspx The unusual...
OK, I'll post the question that section as well. Regards, Rik
Does anyone know more about this Swiss 512BBi offered by DK Engineering?...
Having seen what the 365BB and 512BB have done over the past 5-10 years, it is my personal opinion that the F512M is going the same route. With...
Thanks to all for the feedback and input. It definitely provides food for thought. I am a bit surprised to learn that the progosis for SA prices...
I am considering upgrading from my 550 Maranello to a Superamerica. After having read through the many posts here on FerrariChat, I am somewhat...
A quick question to the tech specialists here. My F355's engine is out for its major service. How much extra work (i.e. how many hours) is it to...
Thanks to all for the input. It turns out that it was the belt. Problem has been fixed already by the dealer.
The noise is actually quite harsh. Perhaps I should say more like a clicking noise than a ticking noise. The car is almost 400 km from my place,...
Hi all, I went to see an F512M that is for sale locally. When the engine is running at idle, there is a harsh ticking noise emanating from near...
Thanks Taz! I will tackle the differential as well then. Sounds like a fairly inexpensive thing to do while the car is on the hoist. Shell...
Hi everybody, It is about time to give my 550 its annual service. I am going to do it myself with the car on the hoist in my garage. Before...
Thanks Taz, As luck would have, a fellow 599 owner stopped by at my place this evening. He also has a bypass switch in the cockpit. Regards,...
OK, I managed to reroute the vacuum hoses. Exhaust note at idle is definitely louder. Actually, for the time and cost involved, it is probably the...
Thanks, Terry! Is there a way I can electrically control the bypass solenoid, rather then rerouting the vacuum hoses? It would be neat if I could...
Can anyone point me to the procedure on how to wire permanently open the muffler bypass valves on a 550? I think I found the procedure for the job...
Heeft er iemand ervaring met Wiggers Mastercars in Enschede? Ik heb de zaak bezocht en Marcel Wiggers zag er mij een correcte zaakvoerder uit....
Thanks John! That looks a whole lot cleaner than the messy job I saw on the car I inspected. Regards, Rik
Went to inspect an F512M today. Car looked splendid in all respects. I have one question regarding the black goo I have seen at the inside of the...
