© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here is the Backup camera cable you need Ferrari Part : 266797 and here is the wiring diagram for anyone who interest in doing retrofit [ATTACH]...
Here is the procedure how to change the Coding by Leonardo 1st : Go to proxi coding option which on BCM then read the car data 2nd : change Rear...
Hello, Today I did the back up camera retrofit on my F12, My car doesn't equipped with it, so in order to make a retrofit I need to Bought a...
Btw I found out the NIT connector which exactly Ferrari use it... If anyone doesn't want to cut the wire, we can make the wire completely plug...
The amp install in Factory location with the custom mounting base, I wrap the wire with the same tape as Ferrari use : Tesa 5136 so all of the...
I end up bought the Mosconi Pico 8-10 DSP, to fit all of the speaker, the sound is awesome, the system I use Focal ES 165KX2 on the Front Door...
@Scout123 I have a question, so you use the High Level input on your Amplifier or you use some converter which can switch to low level input on...
@colonels : I did a lot of research, Mustang People got the same issue when they do Lithium battery, so they disable Smart Charging system by just...
@Alex-01 how hard it is to remove the interior part?
Yeah, same problem with me if I put Lithium Battery, if u drive more than 1000 miles your battery will be empty, so I switch back to AGM setup...
@colonels : After u install Lithium battery, do u have issue with Charging system? when I Installed lithium battery seem like the car doesn't...
I got the SF90 today, I'm using the Superfast charging from the other supplier, not Ferrari one, it actually charge very fast, about more than 1...
only refinish, what is the other solution ?
Can u Make the video of how your carplay perform ? thank you so much can It add 2-3 phone in the same time, example if my wife driving my car...
so u connect carplay via wife or usb port in the center console? thanks where u round the mic and speaker? how is audio quality? thanks
can u upload a video how it enter the menu and do u still keep a photos how to install it step by step
My final project will be install a Mosconi 6 I 8 or 8 I 12 DSP amp, I will attach the original car wiring diagram here and see if anyone interest...
If you Guy doesn't want to make a Custom Adapter, and want it trully plug and play, You guy can buy the Speaker Adapter from Scuderia Audio, Mike...
Here is the Speaker Adapter I made for the Front Door and the Tweeter and Cross over install.. Just a speaker alone make a huge change for my...
Hello, I bought my F12 used over 3 years ago, Because I usually afraid of not Original Ferrari so I decide not to do any modification on it. But...
