© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
What size of drill did you use to drill out the rivets? Next question what size rivet did you use to put them back on the car? Sent from my...
Here are the pics Now to mount the original on a good piece of oak and display [ATTACH] [ATTACH] [ATTACH]
The old wheel is finally out after drilling and using a screw extractor as suggested. New wheel is in, screws have never sieze on them. Sent...
Been working through the recommendations. Screw extractor is next. Looking at using 5/64 drill (left hand) and then the extractor. Looking at...
I used a soldering iron for 15 minutes on each screw and then repeated. I tried the impact driver again and the same results, nothing moved. (the...
Its an impact bit and looks fine after repeated hits. I've been hitting as hard as possible and the driver requires it to be turned c-clock after...
The impact driver didn't do a thing. Doesn't look any of them even twitched. I kept turning the driver count clock after each hit... Any ideas?...
Thanks for the hint and the link, the tool is on order. Hope it does the trick as these screws are proving to be a bear to get out.
I've been painting the pb on since Thursday. Gave each screw a couple of wacks on the back of the hex socket with a mallet. Will try with a...
Pb blaster hasn't worked so far, onto heat with a soldering gun tomorrow. Sent from my SPH-L720 using Tapatalk
I just took delivery of the momo montecarlo to replace the original wheel for my '83 308, other than needing the 3mm hex socket and probably a...
Anyone have any insight on bushings from awitalian.com? Any positives or negatives about them as a Ferrari parts seller? Thanks Glenn Sent...
All Gave up and went to the dealer and they found the EGR was stuck and there was a hairline crack in the tube to it. They replaced both and...
Do you mean the tachimetric pickups? I had them replaced (due to one failing) about 9 years ago. Then it just prevented the car from...
camcorder video, I've cut the video resolution to make the file size smaller to meet guidelines at the 30 minute mark it was running fine...
--> No problems from March to December until I failed emissions. Replaced cats, passed emissions but started having the idle problem. Idle problem...
One question keeps going through my head about this, how does changing the cats cause this problem to appear? The connections on the cats are for...
