© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
thanks I’ll have a look and report back. Hopefully the ECU’s will be here in the next few days, question regarding these, as I’m reading...
The #22 fuse appears to be ok
Thanks for all the suggestions, gives me something to work with. regarding the potential mixed up wires on the two Cat ecus behind the rear...
No these issues have only recently started, despite the amount of codes, and the look of those clamps the car ran quite well prior to this. I...
Ok so I’ve improved the exhaust leak, it’s 95% better now, I plan to fix this completely in the next couple of months as I plan to replace the...
Forgot to mention, slow down light is flashing as soon as I start the engine.
Placed the order for the ecus and probes, whilst I’m Waiting for those I’ll tend to the exhaust and have a look at the evap system. I don’t...
Do these help Also I just looked and missed these codes P1454 P1445 (pending) P1446 (pending) [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Regarding the old spark plugs, the old leads were quite wet in and poor condition, new leads have been fitted with the new spark plugs, could...
I was under the impression my car only had a tubi silencer fitted, and that the rest of the system was stock, so you think I have sports cats? I...
1996, 5.2 US model, TUBI silencer so I’m trying to fix an issue(s), and rather than throw money at more parts I’d like to get opinions first. So...
it looks like the 360 hub has a sensor which should be able to be removed [ATTACH] [ATTACH]
My rear wheel bearing is in need of replacement. Ferrari and other suppliers are out of stock, part no longer available. Ferrari have phoned me...
Mine is a 5.2. Will take a look thanks
I have a US 1996 LHD spider, will this have a Bosch or ATE abs system, if its not year specific how can I tell? Thanks
well I thought the codes pointed towards the left bank, Number 2 I can get an infrared thermometer here tomorrow, but don’t forget the bank comes...
so the side relating to the cats which have flagged up on the codes just so happens to be the easiest ecu to access, can i not just unplug the...
Or could I temporarily unplug it and see if this stops the problem
Thanks I’ll check some fuses and clean the MAF first regarding the left bank cat thermocouple ECU, firstly is that this? secondly can I swap...
I’ve asked on a group messenger too, but just incase anyone here can assist. my 96 5.2 is intermittently dropping a bank/limp mode when 15/20...
