© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
hold the presses. i'm doing a 308 gtsi. i just looked at the heater boxes - they are easy. the question is can i get at the union of the heater...
thank you all. i'm doing them all including the rear one to the engine. i was afraid you'd tell me about rivets. gloves sound mandatory. wish...
just gain access.
i'm going to replace all my heater hoses. what do i need to do with the heater boxes to get access to the hose pipes on them? any other tips...
aftermarket ignition with way more timing advance made a big difference. jon s
ok here it is. trivial problem but it kills me to break that 40 year old plastic. rails come off with 2 bolts. adjuster side has a large knob...
mike: thanks but solved the problem. seat goes to leather guy tomorrow. jon
oh well, i'll let you know. jon s
i'm having the bolster leather on the driver's side replaced. before i attack 40 year old plastic on the knop that controls the seat back rake i...
ford red touchup matches my 308 perfectly. jon s
steve: thanks. you're right, it's a couple of needle worths. i sat down with the wiring diagram last night and came to the same conclusion about...
finally checked my oil pressure directly with mechanical gauge-80 psi cold at idle-happiness. oil press gauge reads 45psi - replaced sender...
thank you both. i love $80 - i've been seeing $190 or more. jon s
finally got around to verifying the oil pressure with a mechanical gauge. i need a new sender. are there any other options other than buying an...
i've enjoyed my 81 immensely. you will too. jon s
when i replaced my rack with a rebuilt stock unit i noticed the same thing. with time, as the bushings have set in it has started to free up....
i just finished making and installing an aluminum shield for the grill on the engine cover to cover the coil pack (the ecu is in the trunk)....
listen to brian. when we changed the advance curve when the blown digiplexes were replaced with an elctromotive unit the gain in horsepower was...
my recollection was that the 850/101 series alfa used banjo fittings but i could be wrong (more than once come to think of it). also the hose on...
found the answer; sounds like 30psi front and 35 psi rear is a good place to start.
