© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
if this is like the same interface as the sunroof assy. you could use a large flat-head screwdriver as a last resort. maybe a vise-grip on the...
the biggest advice is to go slow. when taking apart the seats, the lean adjuster gear mechanisms have a screw (big ugly phillips black screw) that...
update: still soaking the leather seat components with that leather conditioner oil compound their kit comes with. the complete turn-around in...
can you go into more detail of the repairs done? i'm interested into what came loose or wore itself as such, so i can expect this kind of failure.
while we're on the topic of those fibre clips, does anyone have any insight into the replacement of that bulb? the one that drives the fibre...
from the picture if we're looking at it from the bottom appears to be higher up than that area itself. look at how the adjoining plate also has...
SHHH!!! don't tell sidtx that. they're all gone, production has ended years ago! we NEED a 3d printer to make this work! ... >.>
i see that with picture comparison we will have a similar color. lenses and lighting angles do hell for photos. anywho, i like how you did it....
if you could look around the car for a few symptoms other than just the hard start. you should look for things like a raw fuel odor from a...
I'M NOT INSTALLING A FLAME KIT. end of story. you know that would be a bad idea, and you're flaming enough as it is :P
oxygen is part of water and over time they water will split off. as long as you drive the car holding atleast 2k rpm on road for a romp or two,...
from pulling the motor on the mondial 85' qv on sidtx's (mine-basically), i can say that those look very identical. for as expensive as some of...
pain in the ass, reporting in. overall the project has been a lot of fun to do. we will likely end up using close to a couple gallons of LT as...
fabricate it out of metal. seriously though, you won't. plastic will just do it's own thing over time.
question for you with this. with this little mod that you did, are you bypassing the starter switch circuit and installing your own due to bad...
most times shops often fit and clamp these hoses dry, and say "it's good enough" personally, i always swab a bit of silicone gasket sealer on...
